AsRock X570 Phantom Gaming 4 - No Post |
Post Reply |
Author | |
Sycranet
Newbie Joined: 10 Apr 2020 Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 10 Apr 2020 at 6:58am |
Hello,
After completing the setup of my build, CPU and DRAM error LED immediately light up on boot. The PC stay on for a few seconds, then reboot endlessly. Config : - AsRock X570 Phantom Gaming 4 - AMD Ryzen 5 3600 - Asus Nvidia RTX 2060 - HyperX Fury DDR4 3200 CL16 2x8 - Noctua NH-U12S So far, I've tried resetting the RAM, booting with 1 stick, then the other, resetting the GPU, clearing the CMOS. |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
what is the error code? What are you using for a heatsink on your 3600? What Power supply are you using? Is your PSU plugged in properly to the motherboard and video card? Are you unplugging the power from the motherboard when you are clearing the CMOS?
Some have had to pop out the CMOS battery with power disconnected to be able to fully clear/reset the BIOS .. do you have the RAM in A2/B2 slots? |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Sycranet
Newbie Joined: 10 Apr 2020 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
- I don't have an error code, the only error indicators I have are the CPU and DRAM red LED.
- The heatsink is the Noctua NH-U12S - The power supply is the Gigabyte G750H - 750W - The PSU is properly plugged in as far as I can tell. - I'm always unplugging the power before I try any type of modification. - The RAM are in the A2/B2 slots. |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
missed the Noctua you listed in the first post ..
Have you tried reseating the CPU? ..or try and boot everything out of the case .. maybe an extra stand-off touching the back? Check to see that the back plate isn't possibly grounding out/touching any metal directly? Are all these parts new? Can you check parts on another setup to verify they work? Inspect RAM slots for bent contacts, debris, etc ..? Looks like you have a decent parts though .. |
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Sycranet
Newbie Joined: 10 Apr 2020 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Here is what I checked today
- Reseated the CPU - Reseated the GPU - Reseated the RAM - Clearing the CROM by taking off the battery - Checked if the back plate is touching any metal (it's not) - Cleaned the slots for the RAM and the GPU. - Yes all the parts are new. - Unfortunately I don't have another setup to test the part separately. I also took some pictures to help visualize everything : https://imgur.com/a/LZsHSSh |
|
RLGL
Senior Member Joined: 29 Jul 2018 Location: MN Status: Offline Points: 1995 |
Post Options
Thanks(0)
|
Is the RAM on the QVL? I not get RAM that is on the QVL. If so take it out of the case . Put the board on a non-conductive surface. Install CPU, PS,1 stick of ram and GPU. What happens any status codes?
|
|
Asrock Z370 Gaming K6,Intel i7 8700K,
Asrock x570 Taichi |
|
Sycranet
Newbie Joined: 10 Apr 2020 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
Finally got it to work.
Not certain of what made it work in the end, but I reseatted the CPU again, then the RAM, then I tested it 1 by 1, and when I put the two back in it worked. Thanks to both of you for the advice m. |
|
ThreeDee
Senior Member Joined: 24 Jul 2019 Location: Billings,MT Status: Offline Points: 2396 |
Post Options
Thanks(0)
|
YAY!
|
|
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |