|
AM4 BIOS info |
Post Reply 
|
Page <1 1112131415 16> |
| Author | |
thediggydoo 
Newbie 
Joined: 16 Nov 2021 Status: Offline Points: 100 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 16 Nov 2021 at 2:53am |
|
Board model: A520M-HVS
BIOS version: 1.90 CPU: Ryzen 5 3600 RAM: 2 x 8GB Corsair Vengeance LPX CMK16GX4M2B3200C16 (1 rank) Notes: Sometimes, maybe every 4 or 5 cold starts, the mobo cannot find my graphics card and halts with 5 beeps. I have written more details in this thread. |
|
 |
|
|
woodoodm
Newbie
Joined: 10 Dec 2021 Location: Russia Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 10 Dec 2021 at 6:07am |
|
Board model: X300TM-ITX
BIOS version: 1.20 CPU: Ryzen 5 PRO 4650G RAM: 16Gb (2x8) 3200 Notes: Starting from CPU Temp 65C and up the Fan randomly starts rotating with maximum RPM for 1-2 seconds. The Fan behavior appears in all Fan operation modes, like silent mode, standard mode and manual curve mode. We use X300TM-ITX in our mini-PC design and it's working pretty well. But the Fan randomly activity really annoying. Maybe some BIOS settings adjustments can help to solve this issue? Thank you. 
|
|
|
X300TM-ITX user
|
|
|
|
|
pokuly
Newbie
Joined: 11 Jan 2021 Status: Offline Points: 235 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Dec 2021 at 8:50pm |
|
Half a year later i thinik the USB problem will never be fixed.
It became better but not fixed. Every few weeks my keyboard unregulary isn't detected on boot no matter what setting. Intel here i come again! If an admin reads that please delete my acount. This is the most lame manufacturer forum ever. I already PMd an admin but never got a reaction. |
|
|
B550 Steel Legend / J5005-ITX
|
|
|
|
|
RedChilli
Newbie
Joined: 30 Dec 2021 Location: UK Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 30 Dec 2021 at 7:54pm |
|
Motherboard: B450M Steel Legend
BIOS version: 4.20 CPU: R7 2700 RAM: 16Gb (2x8) 3000 Graphics card: MSI Nvidia 1650 Super 4GB I had the issue of stuck initial screen on first cold boot, then I had to do a quick power off/on reboots to finally load the OS. Fix: In my case I was able to fix the issue by enabling Secure boot. Now my OS loads first time from a cold boot. To enable secure boot, please first disable CSM on Boot section of the bios. Then save and exit. And then enter again the bios to enable Secure Boot and save. I understand CSM is related somehow to the graphics cards. I would suggest to add the graphics card to the description of the issue. Some old graphics can only run on CSM mode. In some Motherboards CSM might not appear. Hope this helps others that had the same issue. Please post if it does. Thnaks. |
|
|
____________________
|
|
|
|
|
CopyThat
Newbie
Joined: 29 Sep 2018 Status: Offline Points: 102 |
Post Options
Thanks(0)
Quote Reply
Posted: 01 Jan 2022 at 5:37pm |
Thanks for this. I have the same problem, changed CSM and I will see what happens. 
|
|
|
ASRock Z790 Pro DDR5,BIOS 9.08,32Gig.G Skill F5-5600J3636C16GRS,GTX 1050Ti
|
|
|
|
|
thediggydoo
Newbie
Joined: 16 Nov 2021 Status: Offline Points: 100 |
Post Options
Thanks(0)
Quote Reply
Posted: 03 Apr 2022 at 9:38pm |
|
Board: A520M-HVS
BIOS version: 2.10 (Agesa 1.2.0.6b) CPU: Ryzen 5 5600G RAM: 2 x 8GB Corsair Vengeance LPX CMK16GX4M2B3200C16 (single-rank) Stable, no obvious problems noticed, but the usual strange behavior of 5 reboot loops directly after BIOS upgrade happened again. I feel like it might be performing a bit slower than on BIOS 1.90 - at least I remember 7za benchmark (memory intensive) being better before, but I can't confirm 100% since I forgot to save benchmark results from before updating to BIOS 2.10. |
|
|
|
|
Markz
Newbie
Joined: 12 May 2022 Location: Finland Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 12 May 2022 at 3:56am |
|
Motherboard: X570 Steel Legend (no Wi-Fi)
BIOS version: 3.90 Update AMD AM4 AGESA Combo V2 PI 1.2.0.6b CPU: Ryzen 5 3600X RAM: Kingston HyperX Predator DDR4 RGB 3200MHz 16GB (2x8GB kit) There are issues with this bios version. It's giving WHEA LOGGER EventID 18's (Processor Core) and hard reboots after an hour or sometimes after 2-6 hours or more while playing. So i'm waiting for 1.2.0.7 to appear so i can update it. Been looking for bios version update daily since it was released to other motherboards. |
|
|
|
|
Mr mathias
Newbie
Joined: 02 Jun 2022 Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jun 2022 at 12:59pm |
|
Board model: x570m Pro4
BIOS version: P3.70 CPU: Ryzen 3600x RAM: Corsair vengeance 2x8GB Notes: Boot problem, If power has not been completely switch off since last shutdown computer will start fans and run indefinitely without any display, or bios start. Boots normally into windows after plug has been pulled for 15 sec. |
|
|
|
|
Markz
Newbie
Joined: 12 May 2022 Location: Finland Status: Offline Points: 30 |
Post Options
Thanks(0)
Quote Reply
Posted: 02 Jun 2022 at 9:27pm |
Rolled back to AMD AM4 AGESA Combo V2 PI 1.2.0.3 Patch C after looking about info that 1.2.0.7 still has some bug which doesn't give proper CPU boost (it should've been fixed by now, but it is not) so the best working bios version for now is AMD AM4 AGESA Combo V2 PI 1.2.0.3 Patch C for X570 Steel Legend. |
|
|
|
|
dozier768
Newbie
Joined: 09 Aug 2022 Location: USA Status: Offline Points: 15 |
Post Options
Thanks(0)
Quote Reply
Posted: 09 Aug 2022 at 5:06am |
|
Crashes with memory set at anything over 2400, Upgraded from a ryzen 2600x to a 5600
the memory ran at 2933 without issue on the 2600 with the same timings and voltage but the 5600 wont run at anything higher than 2400. it wont run the xmp profile either which it 3200. I upgraded the bios to the latest. Fails MEMTEST86 on anything above and hard crashes. computer shuts off. B450m-hdv R 4.0 Bios version 4.90 Ryzen 5600 "non X, non G" G.Skill ddr4-3200 P/n F4-3200C15-8GVR |
|
|
|
|
Post Reply
|
Page <1 1112131415 16> |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
RedChilli wrote: