x370 Taichi pcie line issue |
Post Reply |
Author | |
giuseppe30
Newbie Joined: 27 Apr 2021 Status: Offline Points: 195 |
Post Options
Thanks(0)
Posted: 04 May 2021 at 6:33pm |
Hello,
I have issue with low speed 10gbe fiber card this is my configuration: MB: Asrock x370 Taichi bios v 5.60 CPU: Ryzen 5 3600 PCIE1: empty PCIE2: Intel x710-DA2 fiber card PCIE3: hd radeon 5450 gpu PCIE4: empty PCIE5: empty fist m2 slot: 500GB SSD crucial second m2 slot: 1TB SSD WD 6x SATA HDD This is snapshot of my system check (Freenas) what can I do? |
|
giuseppe30
Newbie Joined: 27 Apr 2021 Status: Offline Points: 195 |
Post Options
Thanks(0)
|
ket
Senior Member Joined: 13 Jul 2017 Location: UK Status: Offline Points: 1676 |
Post Options
Thanks(0)
|
The card is going to be sharing bandwidth primarily with the GPU. Look in the Taichi UEFI and see if you have an option for PCI-E Bifurcation (Asrock might be calling it something else) there might be an option with it that allows you to increase the available lanes to the primary 16x slot. You can also go to Device Manager, look for your ethernet card under "Network adapters" and check the configuration options on the "Advanced" tab. Make sure things like the maximum speed are set to the highest value full duplex and not anything like auto-negotiate.
|
|
giuseppe30
Newbie Joined: 27 Apr 2021 Status: Offline Points: 195 |
Post Options
Thanks(0)
|
So I have remove second ssd m2 and put gpu in PCIE5 then setting 16x slot for PCIE2.
now I have 10gbps link connection. |
|
giuseppe30
Newbie Joined: 27 Apr 2021 Status: Offline Points: 195 |
Post Options
Thanks(0)
|
I dont understand why if I set 2 slots 8x the card works slowly so I'm forced to set just one slot (PCIE2) at 16x
|
|
ket
Senior Member Joined: 13 Jul 2017 Location: UK Status: Offline Points: 1676 |
Post Options
Thanks(0)
|
Possibly due to not enough available bandwidth when the bus is set to run at 8x, it might also be a driver problem for your fibre card, or something else entirely diagnosing Ethernet issues when you aren't in the surroundings to look at everything is not easy.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |