ASRock.com Homepage
Forum Home Forum Home > Technical Support > Intel Motherboards
  New Posts New Posts RSS Feed - Fan speed control j4205
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Fan speed control j4205

 Post Reply Post Reply
Author
Message
simon2021 View Drop Down
Newbie
Newbie


Joined: 13 Jun 2021
Status: Offline
Points: 35
Post Options Post Options   Thanks (0) Thanks(0)   Quote simon2021 Quote  Post ReplyReply Direct Link To This Post Topic: Fan speed control j4205
    Posted: 13 Jun 2021 at 3:38pm
System: J4204-itx
OS: Ubuntu 20.04

I want to control the fan speed of the housing cooler. Rigth now both fans are running on a middle speed.

There is a similiar thread, but did not help me as the link does not work and the further search did not bring any helps. Furthermore the kernel module mentioned there seems already installed (see later).

I followed these instructions, but got stock at pwmconfig as it gives me:

There are no working fan sensors, all readings are 0.
Make sure you have a 3-wire fan connected.
You may also need to increase the fan divisors.

The strange thing is that when I answer the questions in pwmconfig with yes, the fan speed increases to maximum. So it seems there is some control.

Output of pwmconfig:
Found the following PWM controls:
   hwmon2/pwm1           current value: 80
hwmon2/pwm1 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon2/pwm2           current value: 117
hwmon2/pwm2 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon2/pwm3           current value: 255
hwmon2/pwm3 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon2/pwm4           current value: 255
hwmon2/pwm4 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon2/pwm5           current value: 255
hwmon2/pwm5 is currently setup for automatic speed control.
In general, automatic mode is preferred over manual mode, as
it is more efficient and it reacts faster. Are you sure that
you want to setup this output for manual control? (n) n
   hwmon2/pwm6           current value: 255

Giving the fans some time to reach full speed...
Found the following fan sensors:
   hwmon2/fan1_input     current speed: 0 ... skipping!
   hwmon2/fan2_input     current speed: 0 ... skipping!
   hwmon2/fan3_input     current speed: 0 ... skipping!
   hwmon2/fan4_input     current speed: 0 ... skipping!
   hwmon2/fan5_input     current speed: 0 ... skipping!
   hwmon2/fan6_input     current speed: 0 ... skipping!

There are no working fan sensors, all readings are 0.
Make sure you have a 3-wire fan connected.
You may also need to increase the fan divisors.
See doc/fan-divisors for more information.




      
Back to Top
simon2021 View Drop Down
Newbie
Newbie


Joined: 13 Jun 2021
Status: Offline
Points: 35
Post Options Post Options   Thanks (0) Thanks(0)   Quote simon2021 Quote  Post ReplyReply Direct Link To This Post Posted: 14 Jun 2021 at 2:57am
simon2021I

I cannot change the post above, but here is some additional info:

The fans are chassis fans, but they are connected to the CPU Fan connector on the motherboard. In BIOS, the aim temperature is set to 60°C, the aim temperature is connected to the cpu temperature and is shows cpu temperatures of 45°C.

They are running all the time, I want them to start only when the temperature is higher than the aim temperature.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.203 seconds.