H510 PRO BTC+ |
Post Reply | Page <1 23456 13> |
Author | ||
Kaeldius
Newbie Joined: 30 Oct 2021 Status: Offline Points: 30 |
Post Options
Thanks(0)
|
|
I have 4 cards running on it right now :
- 2x radeon 6600 - 1x radeon 6700 xt - 1x geforce 1060 (yeah, i know...) |
||
Sasha37
Newbie Joined: 23 Oct 2021 Location: Canada Status: Offline Points: 135 |
Post Options
Thanks(0)
|
|
2 cards was easy. how about 5 or 6? |
||
Kaeldius
Newbie Joined: 30 Oct 2021 Status: Offline Points: 30 |
Post Options
Thanks(0)
|
|
Hey guys, had exactly the same problem with 2x Radeon 6600 not working together, whatever slots I put them in.
Single use of each card was working though. So, to let you know, after testing everything, the solution for me was this :
Activating C.A.M on BIOS was the only working solution. BTW the 5 beeps error is indeed caused by no monitor plugged to 1st card (or what ever you set BIOS for). I have 4gb RAM (so 8 isn't mandatory), I didn't even update BIOS to 1.30 (I don't use 30 NVIDIA series) and I'm on HiveOS, mining Ethereum on NBMiner. Thanks everyone for the help, I hope this post will also help other people because vanishing after solving problems doesn't help communities ;) |
||
AVylkov
Newbie Joined: 25 Oct 2021 Status: Offline Points: 60 |
Post Options
Thanks(0)
|
|
I think something strange is happening. I only have these options in advanced menu of BIOS:
- CPU Configuration - chipset configuration - storage configuration - super OI configuration - ACPI configuration - USB configuration - trusted computing Just when i put the second GPU My system is going to sleep, I can see both cards are powered, the fans are working. I am out of ideas what is the problem exactly |
||
Bobberetic
Newbie Joined: 19 Oct 2021 Location: Sydney Status: Offline Points: 205 |
Post Options
Thanks(0)
|
|
Hey mate,
Sorry I think it's one of the first few options when you go into the GPU options in the BIOS. It should be 3rd or 4th item on the list and it's default setting is AUTO. I think you want to set it to enable (I think this means you enable the system to only run off integrated graphics?) I can't quite remember, if you're having more trouble I can go and check it properly |
||
AVylkov
Newbie Joined: 25 Oct 2021 Status: Offline Points: 60 |
Post Options
Thanks(0)
|
|
Hi , where did you find this option to choose INTEGRATED ONLY ? I was not able to see that.
|
||
Bobberetic
Newbie Joined: 19 Oct 2021 Location: Sydney Status: Offline Points: 205 |
Post Options
Thanks(0)
|
|
I read them all but no solution :'(
But I did find my own solution!! Switched Boot Graphics from Auto to Integrated only, and then switched all PCI link speeds to Gen 3 instead of Auto. For whatever reason that worked fine. Also, I have no idea what else to do with my Pi so I figured a little screen would be cute :3 |
||
Sasha37
Newbie Joined: 23 Oct 2021 Location: Canada Status: Offline Points: 135 |
Post Options
Thanks(0)
|
|
As for the problems that you are having on the ninth page - it might be a good side to read the first 8, before asking for help
|
||
Sasha37
Newbie Joined: 23 Oct 2021 Location: Canada Status: Offline Points: 135 |
Post Options
Thanks(0)
|
|
Good for you, you have everything. Enjoy it. As for me - I don't use monitors after the rig is launched and working, why waste a nice Strawberry PI? |
||
Bobberetick
Newbie Joined: 26 Oct 2021 Status: Offline Points: 45 |
Post Options
Thanks(0)
|
|
I switched from 3060 to 2070S and this time the card lights up and the fans spin, red led goes away (yay!) But now I'm getting 5 beep error with the card in. I tried HDMI in board, 5 beeps, HDMI in card, 5 beeps |
||
Post Reply | Page <1 23456 13> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |