H510 PRO BTC+ |
Post Reply | Page <1 34567 13> |
Author | |
Bobberetic
Newbie Joined: 19 Oct 2021 Location: Sydney Status: Offline Points: 205 |
Post Options
Thanks(0)
|
How're you going to set up your bios and OS without a screen? I've got monitors for setup and a Raspberry Pi screen for monitoring down the track. Do you know anything about the problems we've been having above? I'd love for some help! |
|
Sasha37
Newbie Joined: 23 Oct 2021 Location: Canada Status: Offline Points: 135 |
Post Options
Thanks(0)
|
What a sad example of good idea lost in undeveloped details. This board indeed could be fantastic, but for now only problems. For example - why do we need to have HDMI plugged in at all to boot it? Could this stupid engineers figure out that most of the rigs don't have dedicated monitors attached? It is supposed to professional BTC board, right?
|
|
Bobberetic
Newbie Joined: 19 Oct 2021 Location: Sydney Status: Offline Points: 205 |
Post Options
Thanks(0)
|
Hey mate!
I just went and tried that by unplugging GPU #2 and running the HDMI off GPU #1, but the GPU LED indicator stayed red and I got the CPU/GPU 5 beep error. If I restart the system using the MOBO HDMI the 5 beep goes away and the board displays slot 1 as red on the MOBO screen on startup. I'm finding it super difficult to find any information on the LEDs or MOBO screen displays slots as red. Can you check if yours is green when you turn it on with 1 GPU? |
|
Valkov
Newbie Joined: 27 Oct 2021 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hello Bobberetic , it is working fine when I have just one GPU inside 1st slot. Did you plugged in the HDMI directly to GPU and not to motherboard ?
|
|
Bobberetic
Newbie Joined: 19 Oct 2021 Location: Sydney Status: Offline Points: 205 |
Post Options
Thanks(0)
|
Hi AVylkov, can I ask how your system operates when you have 1 GPU installed? My MOBO doesn't recognise any GPUs in any slots and I'm wondering if the board is dead on arrival (seen on other posts this can happen). |
|
AVylkov
Newbie Joined: 25 Oct 2021 Status: Offline Points: 60 |
Post Options
Thanks(0)
|
Hi Kenzo, as far as I understood you are an expert with this mobo. I need some help to connect 2 GPUs .
My system is : CPU - intel i3 10105f without integrated video RAM - kingston fury beast PSU - Corsair rm750x I have issue when connect the second GPU - the system goes to sleep and it does not load windows. Just the first PCI slot is working. Do you know how to solve this ? |
|
Bobberetick
Newbie Joined: 26 Oct 2021 Status: Offline Points: 45 |
Post Options
Thanks(0)
|
Sorry should have said I'm using a i3-10100 and Crucial 16GB ddr4-2666. Everything works great except for the invisible gpus
|
|
Bobberetick
Newbie Joined: 26 Oct 2021 Status: Offline Points: 45 |
Post Options
Thanks(0)
|
Hi guys,
I've gone through everything and updated bios to 1.3 but still won't recognise gpus. I'm using 2x 3060s in slot 1 and 2, and I'm not longer powering them from the PSU as someone said it comes from the board. On boot the mobo map shows slots 1 and 2 as red, and the LED indicator is also red. In device manager only the integrated GPU shows up, not my 3060s. Fans aren't spinning either. Any suggestions? |
|
Sasha37
Newbie Joined: 23 Oct 2021 Location: Canada Status: Offline Points: 135 |
Post Options
Thanks(0)
|
I have contacted Asrock support and they are indeed as rock. Here is the response to my question about more than 4 GPUs:
"Please refer the PDF link below. https://www.asrock.com/support/faq.us.asp?k=h510 If the problem still persist, I have believe it is a MB issue, please contact the MB seller for MB exchange." Looks like all of us having GPU issue should just exchange our boards and not with Asrock, but the seller. That will make all GPUs work like a charm |
|
AVylkov
Newbie Joined: 25 Oct 2021 Status: Offline Points: 60 |
Post Options
Thanks(0)
|
Hello guys, I also have some issues to set up this motherboard. I have two GPUs and both of them are working and detected if I put them one by one in the first PCIe slot.If I connect one and then the other my system doesn?™t boot. It sleeps because no display signal. I tried to put the HDMI to second GPU and no result, I updated BIOS to 1.3 also but still no positive result. Could you please help me to solve this ?
|
|
Post Reply | Page <1 34567 13> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |