ASRock Z690 Extreme DDR4 - dram issue |
Post Reply | Page 12> |
Author | |
RocketRunner442
Newbie Joined: 01 Jan 2022 Status: Offline Points: 50 |
Post Options
Thanks(0)
Posted: 01 Jan 2022 at 10:45pm |
I recently purchased a ASRock Z690 Extreme DDR4 Intel LGA 1700 motherboard for my new build. Other components are:
Intel Core i7-12700K 3.6 GHz 12-Core Processor NZXT Z73 cooler DOMINATOR® PLATINUM RGB 32GB 3600 CL18 (2 x 16GB) (CMT32GX4M2Z3600C18) M2 nvme 1TB HD (blank) Before adding my GPU and hard drives, I wanted to make sure my case fans and other basic case related hook ups were properly connected. When I boot the computer, everything seems to power on as expected; RGB on the MB, RAM, fans, and cooler turn on as expected. However, the DRAM LED on the MB stays on constantly and I do not get any signal outputted from either the HDMI and DP ports. I tried the RAM in slot 2 & 4. Tried single ram, tried a spare 4GB ram stick and had same results. I also put the Corsair ram in another MB and was able to see it in that bios. Am I running into a compatibility issue or is there something potentially wrong with my motherboard? Thanks in advance! |
|
kellyprankin
Newbie Joined: 04 Jan 2022 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I had a lot of trouble with a similar set DDR4 3600 CL 18 @ 1.35v. I was able to get it to run at 3200 though.
|
|
fille1976
Groupie Joined: 31 Dec 2021 Status: Offline Points: 290 |
Post Options
Thanks(0)
|
Seems asrock have to fix their ram problems on some boards,here also problems with ram.
Can get it to 3100mhz,but i want 3600mhz cause the ram is 3600mhz and not 3100. Hope they fix it with a bios update,or ill buy another motherboard. |
|
RocketRunner442
Newbie Joined: 01 Jan 2022 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
I assume you were able to at least get in the bios at see the board recognize the ram? In my case, none of the onboard outputs seemed to display anything. I brought the Z690 to Microcenter where I bought it and they had similar results with their own ram as well. Ended up returning it. They didn't have any in stock but I am giving the board another shot and waiting for it to be delivered.
|
|
fille1976
Groupie Joined: 31 Dec 2021 Status: Offline Points: 290 |
Post Options
Thanks(0)
|
When i go in the bios,its recognise the memory as ddr4 2133.
So set it manualy to 3100,it works,3200 and 3600 failing to boot. |
|
fille1976
Groupie Joined: 31 Dec 2021 Status: Offline Points: 290 |
Post Options
Thanks(0)
|
After updating to latest bios 3.06,problems still there,think i doin something wrong.
If i set it to xmp,it should just read the 3600 and start with the correct settings. |
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8517 |
Post Options
Thanks(0)
|
Hi fille1976,
Thank you for your post. Could you provide a detailed model of your memory? You can find it on the label of your memory module. CMT32GX4M2Z3600C18 ver X.XX All the best ASRock TSD |
|
fille1976
Groupie Joined: 31 Dec 2021 Status: Offline Points: 290 |
Post Options
Thanks(0)
|
Hi,
Sorry for hijack this topic. My model memory is CMW32GX4M4D3600C18 Its corsair vengeance rgb pro 4x8gb |
|
fille1976
Groupie Joined: 31 Dec 2021 Status: Offline Points: 290 |
Post Options
Thanks(0)
|
https://forum.asrock.com/forum_posts.asp?TID=20034&title=z690-steel-legendcorsair-3600mhz
Can you please post there ?,thats my topic. |
|
RocketRunner442
Newbie Joined: 01 Jan 2022 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Just wanted to follow up on my issue. Got my replacement motherboard (got the exact same one). This time, absolutely no problem. Put together the PC, booted into bios, set to xmp 3600 and still had no issue. I guess I got unlucky with my first board.
|
|
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |