asrock H110M-HDV not work front panel usb |
Post Reply | Page 123> |
Author | |
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
Posted: 05 Mar 2016 at 3:25pm |
asrock H110M-HDV not work front panel usb.
back usb port setup usb flash all work |
|
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
|
All the others usb 2.0 and usb 3.0 ports on the computer work fine.
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24218 |
Post Options
Thanks(0)
|
Is the case front panel USB connected to the motherboard and what connector does it have?
USB 2 connectors attach to the headers I highlighted in green and a USB 3 connector attaches to the red highlighted header. Be sure the connectors are connected to the correct headers on the motherboard.
|
|
|
|
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
|
Edited by Jurijs - 05 Mar 2016 at 7:22pm |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24218 |
Post Options
Thanks(0)
|
Is this a PC you built yourself or is it one that was purchased assembled?
Every PC case with front USB ports has cables that need to be connected to the motherboard in order for the front ports to function. The picture I posted above indicates where the cable needs to be connected. The green highlighted header for USB 2 and the red highlighted header for USB 3. As you can see they connections are different for USB 2 and USB 3. You will need to open up your case and check to be sure the front panel USB cable/s are connected to the motherboard in the correct places.
|
|
|
|
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
|
My case Fractal design.
http://www.fractal-design.com/home/product/cases/define-series/define-r5-blackout-edition Edited by Jurijs - 05 Mar 2016 at 6:34pm |
|
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
|
Everything is connected correctly, you need a photo?
|
|
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
|
Foto usb 3.0 and usb 2.0
Edited by Jurijs - 05 Mar 2016 at 6:31pm |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24218 |
Post Options
Thanks(0)
|
A photo isn't necessary Nice case choice by the way
Please understand that we have no way of knowing the experience level of a forum member so I must cover the basics in case your level of understanding is low. Many people purchase prebuilt systems and have no idea what goes on inside their case. Now that we have determined that the cables are indeed connected correctly we can proceed with other troubleshooting steps. From the Speccy screenshot you posted you are using Windows 7 64, an i3 6100 (I am guessing by the clock speed) and a GTX 750ti with your ASRock H110M-HDV board. This is all helpful to know, especially the OS version. Have you installed the USB drivers for windows 7 64? If not you can get them here. If the drivers are in fact already installed then check to see if the front USB ports are providing power to the devices connected to them. If not then check that the devices being connected are properly connected, sometimes front panel USB ports can be very tight when new and prevent devices from properly being seated in the port. If the devices are being powered but not being detected then you can try clearing CMOS or restoring factory defaults in your BIOS to rule out any potential settings that could be disabling or affecting the front panel USB headers. Let me know how it goes. If none of this helps we will have to dig deeper.
|
|
|
|
Jurijs
Newbie Joined: 05 Mar 2016 Location: Latvia Status: Offline Points: 17 |
Post Options
Thanks(0)
|
All drivers are installed.
Front panel usb 3.0 and 2.0 have power and running Logitech H-800 without any problems. It does not work usb HDD or USB flash drive Back any usb port setup usb flash or usb HDD all work Edited by Jurijs - 05 Mar 2016 at 6:39pm |
|
Post Reply | Page 123> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |