Q1900TM-ITX does not boot unless screen attached |
Post Reply |
Author | |
mtruchado
Newbie Joined: 09 Jun 2015 Status: Offline Points: 9 |
Post Options
Thanks(0)
Posted: 09 Jun 2015 at 3:13pm |
Hi
I finished to install my new micro computer based on the asrock Q1900TM-ITX motherboard. The problem is that computer is intended to work with no other cable connected than the power supply and the network cable. If I do this, the computer does not start up. Is there any configuration that I should set on the BIOS?, is this a BIOS issue?, I want this computer not to halt on any error (no keyboard, no mouse, no screen...), as I will access to It remotely. Please, advice. |
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24398 |
Post Options
Thanks(0)
|
Welcome to the forums Let us know if this works for you
|
|
mtruchado
Newbie Joined: 09 Jun 2015 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
I'm 100% sure that the current value is Auto. I was looking in the BIOS this morning trying to look for a function like "halt on error" but I found nothing.
I have no access to this box, this evening (GMT+1) I will try to set this parameter to a fixed value and try. Question: which value should I put for LVSD?, currently It is disabled, is this the right approach if I have no screen at all? Thanks. |
|
mtruchado
Newbie Joined: 09 Jun 2015 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Setting the shared memory size to a fixed value didn't help, however, activating the lvds in the BIOS did It
Is this a bug or a feature? |
|
mtruchado
Newbie Joined: 09 Jun 2015 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Investigating a little bit I got that this is not the only Bay Trail-d with this issue:
http://forums.openmediavault.org/index.php/Thread/4163-BayTrail-OMV-Gigabyte-GA-J1900N-D3V/ This board cannot boot without a monitor connected to it. (Tested with BIOS F1 and F2).You can make a VGA dummy plug to run the board without a monitor. Google "VGA dummy plug" We need a fix for this, because most of these system are perfectly ideal for building micro servers, as their consumption is minimal, non existing heat and no noise AsRock, please, help us. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |