Asrock B450 Steel Legend - NVME support |
Post Reply |
Author | |
PatrickL84
Newbie Joined: 07 Aug 2023 Status: Offline Points: 35 |
Post Options
Thanks(1)
Posted: 07 Aug 2023 at 5:14pm |
Hello,
i am using a B450 Steel Legend Board, AM4 Ryzen5 3600, 16GB RAM, RTX 2080 8GB PCIE1 (PCIe 3.0 x16 slot): RTX 2080 GPU PCIE4 (PCIe 3.0 x16 slot): LAN 10GBE Mellanox Connect X3 (x4 Mode) PCIE5 (PCIe 2.0 x1 slot): SATA Controller Card, 6 Port M2_2 NVME Sandisk Extreme Pro.M2 500GB M2_1 occupied, because using 10GBE Card in PCIE4 will be disabled 4 of 6 SATA3 Ports connected to SATA-HDD, SATA3_4 SATA3_3 disabled because using M2_2 Slot --> in this configuration all devices were working without problems. now i bought an WD Black SN770 2TB SSD to upgrade the 500GB Sandisk --> WD Black isnt show up in UEFI, i noticed that there are "pin missmatch issues with some Boards: see: https://pg.asrock.com/support/qa/Limited%20Support%20SSD%20List.pdf In the first line the B450 Steel Legend is written, with "limited support" for some M2 SSD (SN770 is in the list) that means that those M2 SSD are not working completely or working, but with speed limitations? I considered to change to B550 chipset, but perheps this will not solving my problem. Finally i need a motherboard wich is working with RTX2080, 10GBE ethernet card (x4 Mode), SATA controller (x1 Mode), 4 useable SATA Ports onboard, and one or two NVMEs |
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8727 |
Post Options
Thanks(2)
|
Dear PatrickL84,
Thank you for the posting. For this case, due to hardware limitations, WD SN770 can only be supported on M2_2 slot of B450 Steel Legend. Please update the BIOS to version 4.60 and refer to the following steps to try. 1. Please update the BIOS to 4.60 through Instant Flash. BIOS 4.60: https://download.asrock.com/BIOS/AM4/B450%20Steel%20Legend(4.60)ROM.zip Instant Flash: https://www.asrock.com/support/BIOSIG.asp?cat=BIOS10 2. Boot into BIOS setup and go to Advanced\Storage Configuration, then set ?œForce M2_2 to support PCIe type device??to ?œYes?? 3. Press ?œF10??key to save configuration changes. Thank you Yours truly, ASRock TSD |
|
Rattattastisch
Newbie Joined: 29 Sep 2023 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hi guys,
I had the same problem with the ssd and did all of the steps but nothing worked can u help me pls |
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3672 |
Post Options
Thanks(0)
|
if nothing works, then use PCIe M2 adapter, or different drive or different mainboard |
|
ekinskofer
Newbie Joined: 01 Oct 2023 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I have the same issue. I'm was going to update to a new bios but it says that "ASRock do NOT recommend updating this BIOS if you are going to use Pinnacle, Raven or Summit Ridge CPU on your system." I have the 2700X. What are the consequences of updating my bios while running this CPU? Should I update or just return this NVME and get a different one? What do you all recommend for 2TB to run in these mobos? Many thanks.
|
|
Movethis1
Newbie Joined: 14 Nov 2023 Location: United States Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I have a Asrock B450 Steel Legend with a AMD Ryzen 5 3600. I am trying to put a WD SN850X NVMe in my machine. Does the board support this hard drive and do do I need to update the BIOS? Any help is appreciated!
Thanks |
|
rahmad anjar s.
Newbie Joined: 26 Nov 2024 Status: Offline Points: 15 |
Post Options
Thanks(0)
|
I have an Asrock B450 Steel Legend with an AMD Ryzen 5 5600G. I tried installing multiple 1 Tb capacity nvme SSDs, WD SN850X, XPG s70 blade, Samsung 970 evo plus in NVMe on my machine. Does the board support these hard drives and do I need to update the BIOS? Any help is appreciated!
thanks |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |