Overclocking BCLK on B760m PG Riptide

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello

I want to overclock the intel core i5 12400F processor using the BCLK on my B760m PG Riptide. 

To do this, I've set the ratio to 40 for a BCLK of 110 (frequency sought at 4.4Ghz). The cpu cache ratio was set to 36, and I also paid attention to the ram frequency so as not to exceed its limits. I set the CPU Core/Cache Voltage to 1.15v and set Level 1 to Load line calibration.

When I do a stability test under OCCT, I get errors after 2 or 10 minutes, it varies. I'll need your help with the CPU voltage. Indeed, when I set 1.15v, the vCore is at 1.15v with a resting vidCore at 1.11v. When I run OCCT, the vidCore collapses to 1.05v. I have the impression that the cpu doesn't have enough voltage when under load. If I increase the CPU Core/Cache Voltage to 1.20, I don't see any effect on the vidCore. Another strange point, if I lower the CPU Core/Cache Voltage to 1.12v, I see the vidCore increased under OCCT.

Can you explain how to increase the vidCore voltage correctly? I don't understand how it works.

Best regards

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Wapin Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 27 Sep 2023 Location: France Status: Offline Points: 20	Post Options Post Reply Quote Wapin Report Post Thanks(0) Quote Reply Topic: Overclocking BCLK on B760m PG Riptide Posted: 27 Sep 2023 at 9:59pm
	Hello I want to overclock the intel core i5 12400F processor using the BCLK on my B760m PG Riptide. To do this, I've set the ratio to 40 for a BCLK of 110 (frequency sought at 4.4Ghz). The cpu cache ratio was set to 36, and I also paid attention to the ram frequency so as not to exceed its limits. I set the CPU Core/Cache Voltage to 1.15v and set Level 1 to Load line calibration. When I do a stability test under OCCT, I get errors after 2 or 10 minutes, it varies. I'll need your help with the CPU voltage. Indeed, when I set 1.15v, the vCore is at 1.15v with a resting vidCore at 1.11v. When I run OCCT, the vidCore collapses to 1.05v. I have the impression that the cpu doesn't have enough voltage when under load. If I increase the CPU Core/Cache Voltage to 1.20, I don't see any effect on the vidCore. Another strange point, if I lower the CPU Core/Cache Voltage to 1.12v, I see the vidCore increased under OCCT. Can you explain how to increase the vidCore voltage correctly? I don't understand how it works. Best regards