ASRock.com Homepage
Forum Home Forum Home > Technical Support > HTPC&Gaming Barebone&Others
  New Posts New Posts RSS Feed - DeskMini 310 "UEFI Defaults have been loaded"
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

DeskMini 310 "UEFI Defaults have been loaded"

 Post Reply Post Reply
Author
Message
malejandrodev View Drop Down
Newbie
Newbie


Joined: 20 Feb 2024
Location: CL
Status: Offline
Points: 35
Post Options Post Options   Thanks (0) Thanks(0)   Quote malejandrodev Quote  Post ReplyReply Direct Link To This Post Topic: DeskMini 310 "UEFI Defaults have been loaded"
    Posted: 20 Feb 2024 at 4:29pm
After power interruptions I am getting this message at startup and the computer does not continue to start windows (unless you press F1). The problem is that it is a remote computer in a far away place.

I configured the bios so that the boot after a power interruption is automatic and without intervention but this error changes the bios parameters to the default ones.

These are the parameters that I configure in the bios:

Advanced / Chipset Configuration / Restore on AC/Power Loss = Power On
Advanced / ACPI Configuration / I219 LAN Power On = Enabled
Advanced / ACPI Configuration / USB Keyboard/Remote Power On = Enabled
Advanced / ACPI Configuration / USB Mouse Power On = Enabled
Boot / Boot Failure Guard Message = Disabled



I think the option is not being respected: "Boot Failure Guard Message".

How can I prevent the bios settings from being erased so that I can start Windows unattended?


On some occasions after power outages the computer does not turn on. Pressing the power button does not generate any reaction. A dead device. I have only been able to solve it by resetting the bios by disconnecting the battery or by bridging the contacts (Clear CMOS Pad).

The problem is not solved by replacing it with a new 3v battery.


I believe that the problem that generates the "UEFI Defaults have been loaded" screen occurs when there are several power outages of less than 1 second. When the power outage is longer than 1 second, the computer turns on without problems. When it is less than one second, the "UEFI Defaults have been loaded" screen appears or the device simply does not turn on. In that last case, the only way to bring it back to life is to reset the bios physically by joining the CMOS pins on the motherboard.
Do you know if there is any way to avoid this problem? For now I'm trying to solve it with a UPS.

This problem happens to me with all the Deskmini 310 computers that I have bought (I have 5) and with other Deskmini 110 (I have 6).

The serial number of one of the devices is D9HTXA007409
The BIOS version I use is the most current: 4.40.

I've had this problem for months. Unfortunately I have had to replace the ASROCK equipment with other DELL Micro or HP Mini which withstand power outages without problems.
??


Back to Top
Dgme View Drop Down
Newbie
Newbie


Joined: 21 Aug 2024
Status: Offline
Points: 75
Post Options Post Options   Thanks (0) Thanks(0)   Quote Dgme Quote  Post ReplyReply Direct Link To This Post Posted: 25 Aug 2024 at 2:01am
Originally posted by malejandrodev malejandrodev wrote:

After power interruptions I am getting this message at startup and the computer does not continue to start windows (unless you press F1). The problem is that it is a remote computer in a far away place.

I configured the bios so that the boot after a power interruption is automatic and without intervention but this error changes the bios parameters to the default ones.

These are the parameters that I configure in the bios:

Advanced / Chipset Configuration / Restore on AC/Power Loss = Power On
Advanced / ACPI Configuration / I219 LAN Power On = Enabled
Advanced / ACPI Configuration / USB Keyboard/Remote Power On = Enabled
Advanced / ACPI Configuration / USB Mouse Power On = Enabled
Boot / Boot Failure Guard Message = Disabled



I think the option is not being respected: "Boot Failure Guard Message".

How can I prevent the bios settings from being erased so that I can start Windows unattended?


On some occasions after power outages the computer does not turn on. Pressing the power button does not generate any reaction. A dead device. I have only been able to solve it by resetting the bios by disconnecting the battery or by bridging the contacts (Clear CMOS Pad).

The problem is not solved by replacing it with a new 3v battery.


I believe that the problem that generates the "UEFI Defaults have been loaded" screen occurs when there are several power outages of less than 1 second. When the power outage is longer than 1 second, the computer turns on without problems. When it is less than one second, the "UEFI Defaults have been loaded" screen appears or the device simply does not turn on. In that last case, the only way to bring it back to life is to reset the bios physically by joining the CMOS pins on the motherboard. ehallpass

Do you know if there is any way to avoid this problem? For now I'm trying to solve it with a UPS.

This problem happens to me with all the Deskmini 310 computers that I have bought (I have 5) and with other Deskmini 110 (I have 6).

The serial number of one of the devices is D9HTXA007409
The BIOS version I use is the most current: 4.40.

I've had this problem for months. Unfortunately I have had to replace the ASROCK equipment with other DELL Micro or HP Mini which withstand power outages without problems.
??



To prevent BIOS settings from resetting on your ASRock Deskmini systems after power interruptions, consider using a reliable UPS to stabilize power and prevent brief outages that may trigger BIOS resets. Re-flash the BIOS to ensure stability, check if enabling CSM (Compatibility Support Module) improves boot stability, and disable unnecessary BIOS features that might contribute to the issue. If the problem persists, contact ASRock support for potential firmware solutions, or consider replacing the systems with more robust alternatives like DELL Micro or HP Mini, which handle power interruptions better.
Back to Top
malejandrodev View Drop Down
Newbie
Newbie


Joined: 20 Feb 2024
Location: CL
Status: Offline
Points: 35
Post Options Post Options   Thanks (0) Thanks(0)   Quote malejandrodev Quote  Post ReplyReply Direct Link To This Post Posted: 25 Aug 2024 at 3:38am
I did all the steps you outlined. I ended up switching to a Dell Optiplex Micro/Mini. I have no issues with power outages there. The BIOS does not get corrupted.
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.141 seconds.