Old PC Advice needed |
Post Reply |
Author | |
frund
Newbie Joined: 09 Jul 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
Posted: 09 Jul 2015 at 3:58am |
I have a fairly old desktop PC Put together by myself, with AsRock Conroe 945G dvi mobo. This has XP, Separate Graphics card and 4g ram. Is it possible to put a newer operating system on this setup. I see that Vista is supported but I was thinking about Win 7 . This PC is used for internet and a bit of office work.
Any advice welcome.
|
|
odiebugs
Newbie Joined: 07 Jul 2015 Status: Offline Points: 193 |
Post Options
Thanks(1)
|
What CPU, you have the RAM.
I have put win 7 on systems that should NOT have it. You would need to make sure you have your win XP licence, then try win 7, you don't need to buy it, it has a trial period before you can't boot and must add the licence. Then see if you can find drivers for the hardware or see if the XP drivers work then test it. If it goes well, you are all set. You must be good with installing, looking for drivers and understanding hardware device ID. If you find that you aren't stable and don't want win 7, you will need to reinstall XP ( hence the licence of XP needed ) I'm not a part of ASrock, and you shouldn't install OS that aren't listed, but it could work.
Edited by odiebugs - 09 Jul 2015 at 4:16am |
|
asrocking
|
|
odiebugs
Newbie Joined: 07 Jul 2015 Status: Offline Points: 193 |
Post Options
Thanks(0)
|
People have done this.
A working installation on no less than a Pentium II system. No, that's not a typo--Pentium Two. The extreme...ly old machine consists of a 266 MHz CPU, a whopping 96 MB of memory, and a next-generation 4 MB graphics card.
|
|
asrocking
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24353 |
Post Options
Thanks(2)
|
Windows 7 should work fine on your system so long as you can find drivers for everything (most likely you will). As Odiebugs said, there have been people installing windows 7 on pentum II 266 PCs
|
|
frund
Newbie Joined: 09 Jul 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Encouraged to go on. I have a e4300 overclocked a little. I realise I will need drivers for the mobo and other devices. I have the original XP disc with licence and drivers for everything so I could put it back if all did not go too well. I was very genuine in those days. I don't see drivers for Win7 on the AsRock site.
thanks
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24353 |
Post Options
Thanks(1)
|
Windows 7 should have native drivers for most things motherboard related so you should be fine
Edited by Xaltar - 09 Jul 2015 at 4:26am |
|
frund
Newbie Joined: 09 Jul 2015 Status: Offline Points: 5 |
Post Options
Thanks(0)
|
Awesome. I will have a go at this very soon maybe the weekend. I can put my files temporarily on my laptop. Now there is light, I will report back.
thanks MOD and all for input.
|
|
odiebugs
Newbie Joined: 07 Jul 2015 Status: Offline Points: 193 |
Post Options
Thanks(0)
|
In case you check back, yes that CPU will have no problem, you have the ram to install a 64bit win 7.
Realtek has both your audio and Lan drivers for win 7, but they should be already installed by windows, you can check to see after what version of the driver was installed and update if need be.. If you have a problem with video card, you can get a PCI-E 2.0 x16 card from newegg for 28.00 that has directx 10. 9 is required but not set in stone.
Edited by odiebugs - 09 Jul 2015 at 6:14am |
|
asrocking
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |