Z270 Taichi overclocking |
Post Reply | Page <12345> |
Author | ||
clubfoot
Newbie Joined: 28 Mar 2016 Location: Canada Status: Offline Points: 246 |
Post Options
Thanks(0)
|
|
Corsair pump speed to performance in Corsair Link! Click on the pump icon and change from Quiet to Performance. |
||
roccale
Newbie Joined: 05 Apr 2017 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
|
i7 7700k@5400mhz 1.476v
ASROCK Z270 TAICHI GALAX HOF DDR4 4000 Zotac 1080ti Amp! Extreme@2150mhz. EK PREDATOR 240 + WB EK EVO FN CARBIDE AIR 540 |
||
roccale
Newbie Joined: 05 Apr 2017 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
|
Previously set 1T, it then fake booted 4 times, ienter in UEFI, it show default or what it "thinks" will work, i press F10, save and exit and another time 4 fake boot and the same story.
I was able to boot and enter in os and do everithing with ram all on auto cas 15 1t until 2600 mhz...not more....
|
||
i7 7700k@5400mhz 1.476v
ASROCK Z270 TAICHI GALAX HOF DDR4 4000 Zotac 1080ti Amp! Extreme@2150mhz. EK PREDATOR 240 + WB EK EVO FN CARBIDE AIR 540 |
||
Fraggers
Newbie Joined: 05 Apr 2017 Location: Geneve Status: Offline Points: 7 |
Post Options
Thanks(0)
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24743 |
Post Options
Thanks(0)
|
|
I wouldn't push any DDR4 RAM to 1.75v, the RAM isn't the only factor. Bare in mind DDR4 runs stock at 1.2v with 1.35v for high frequency sticks. Personally I wouldn't go much past 1.4v for daily use. I tend to erre on the side of caution.
|
||
|
||
roccale
Newbie Joined: 05 Apr 2017 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
|
We speak of a type of ram in particular is not a general discussion for all types of DDR4.
We are talking about the samsung b-die. The opinions are many in this regard, some argue do well in 1.5v others say that even at 1.75V they suffer but only feel ticklish. My HOF certified 4000 with 1.4v. Many overclocker use them for hours and hours and hours to over 2.0v they say no desk had never burned. It would be nice to do an experiment and targeted testing ... or someone who uses the b-to 1.75V for at least 1 year ... I can only say that if I can use to 1.70-1.75v in daily could achieve remarkable results with these modules ...
|
||
i7 7700k@5400mhz 1.476v
ASROCK Z270 TAICHI GALAX HOF DDR4 4000 Zotac 1080ti Amp! Extreme@2150mhz. EK PREDATOR 240 + WB EK EVO FN CARBIDE AIR 540 |
||
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24743 |
Post Options
Thanks(0)
|
|
My comment is intended for more amateur users. Comments like "Samsung B-Die are good up to 1.75v" taken out of context could lead to issues in inexperienced hands
I am no stranger to suicide OC runs and record attempts but these more extreme settings must be clearly identified so casual users are not lead astray. Once you push past 1.4v on RAM (DDR4 of any type) you are pushing the RAM VRM and power systems on the motherboard beyond their rated limits. This can shorten the lifespan of the board. Again, I say this for those not aware of the risks. For those willing to take the risk, I am sure you are all well aware of these facts from the outset so don't let me stop you pushing the limits of your systems Let us know what you manage.
|
||
|
||
lantony
Newbie Joined: 04 Apr 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
just found the issue: it was the corsair backplate which was not properly mounted, after rotating it and reapplying the grizzly paste, the temps went down of 8-10c° ! I was also now able to enable XMP 3200 so now my CPU has exactly the same configuration as before with the MSI z170, but now the vcore is 1.34-1.36 instead of 1.38-1.39! I am using the fixed voltage LLC2, looks like there is no way for me to use the offset, so i will keep the config as is for now ;) |
||
Asrock Z270 Taichi v1.30
i5 7600k @ 5ghz 16gb Corsair Vengeance LED 3200 Corsair H80i Zotac 1070 GTX AMP |
||
roccale
Newbie Joined: 05 Apr 2017 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
|
I've already found the limit of my 7700k with liquid, it has to 5500mhz 1.52v.
My fun now is to find the limit of the ram. I carry forward the tests or just cpu or just ram. Rarely I make the bench with cpu and ram to the limit and only when I know that everything is stable and I do not make 1000 tests to stress for example vrm for hours. Let's say one or two well-made bench about 15 minutes in all and I'm done. In any case I see that the mobo also pulls out 67ampere by vrm but they are always cool to the touch if I try from the back of mothrboard !!! A friend overclockers, RULE, makes extreme overclocking ram and cpu under nitrogen and not even uses heat sinks on vrm, he has never had a problem .... and the vrm are covered with rags so do not take nitrogen ...
|
||
i7 7700k@5400mhz 1.476v
ASROCK Z270 TAICHI GALAX HOF DDR4 4000 Zotac 1080ti Amp! Extreme@2150mhz. EK PREDATOR 240 + WB EK EVO FN CARBIDE AIR 540 |
||
roccale
Newbie Joined: 05 Apr 2017 Status: Offline Points: 28 |
Post Options
Thanks(0)
|
|
LLC 2 è perfetto, non droppa nulla.
Questa mobo è un mostro se non cerchi 1t sulle ram. Io a 3200 con timings ultra mega tirati sono a cas 12 con 1.43v. C'è da lavorarci x capirla, è un' altro mondo da asus, gigabyte e MSI...questa è roba seria non da rgb cagati...
|
||
i7 7700k@5400mhz 1.476v
ASROCK Z270 TAICHI GALAX HOF DDR4 4000 Zotac 1080ti Amp! Extreme@2150mhz. EK PREDATOR 240 + WB EK EVO FN CARBIDE AIR 540 |
||
Post Reply | Page <12345> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |