|
X370 K4 - bad Corsair RAM support before UEFI 2.1 |
Post Reply 
|
Page <123 |
| Author | |||
Derreck 
Newbie 
Joined: 21 Apr 2017 Status: Offline Points: 20 |
 Post Options
 Thanks(0)
 Quote Reply
 Posted: 21 Apr 2017 at 11:05pm |
||
|
Thanks for the answer!
Unfortunately I can't as this is my first build in years and all I have is installed inside the chassis.
Yep, I tried. There are interesting results: when I use one stick in A2 or B2 slots Dr Debug shows this strange Error "Ad". When I use A1 or B1 slots Dr Debug shows Error 46 (which means that problem is with the memory)
Yep, tried and rechecked these things. Nothing works. Honestly, I do think that my problem could be with the memory - this particular model isn't in the QVL list for my motherboard (though there are similar models from the same company). That's sad. Also I found that my problem is named "Boot loop" - PC starts working then turns off before POST. Edited by Derreck - 21 Apr 2017 at 11:11pm |
|||
 |
|||
|
datonyb
Senior Member 
Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2017 at 10:54pm |
||
|
making a large assumption here but
seeing as the rx580 is a brand new release do you by chance have another graphics card you can try just to see if its an issue with the rx580 ? have you tried using ram slots a2 and b2 (these are the defualt choice for two sticks) have you tried without any hard drives and dvd connected these are not needed to boot to bios for test purpose now dont be insulted here but a few other tips suggested (not knowing your level of skills) have you connected the extra cpu power plug to top left side of board ? double checked the front panel connectors are in the right place ? eg reset/hd led/pwr sw etc etc tried just one stick in all four different ram slots tried another hdmi slot on graphics card made sure the card is in the pcie x16 slot closest to the cpu connected the cpu fan to the correct cpu fan header some things to try Edited by datonyb - 21 Apr 2017 at 10:54pm |
|||
|
[url=https://valid.x86.fr/jpg250]
 [/url]3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|||
|
|||
|
Derreck
Newbie
Joined: 21 Apr 2017 Status: Offline Points: 20 |
Post Options
Thanks(0)
Quote Reply
Posted: 21 Apr 2017 at 4:39pm |
||
|
Hello. I currently assemble my build - and it does boot but I have no display signal. Screen is blank, and I don't see anything. Obviously I can't access my BIOS. I use HDMI since I don't have any other cables.
All fans (CPU and chasis) starts working, and RGB lightning on GPU is working too. Then they turn off so apparently I get a boot loop with my mobo. I checked power cables, and they seem to be fine. I tried to clean up CMOS and use one memory stick instead of two but it didn't help. Also important notice - Dr Debug shows some strange code ("Ad"). I don't know what that means. This is what exactly happens with my PC: https://vimeo.com/214201312 My specs: Ryzen 5 1600 ASRock X370 Gaming K4 Corsair CMK16GX4M2A2400C16 2x8GB MSI RX 580 Gaming X 8GB 1TB HDD + 120GB Samsung 850 EVO FSP Hydro G 750W Any help will be greatly appreciated! UPDATE: I bought a new Ram - this time from ADATA (AX4U2400W8G16-SRD), and it works fine. It allows me to get into BIOS - which was of the version 1.60. I updated it to a newest available version (2.1) and then I thought about trying to run the mobo with the troubled Corsair memory sticks. Now they work fine too!
Edited by Derreck - 23 Apr 2017 at 4:14pm |
|||
|
|||
|
Post Reply
|
Page <123 |
Tweet
|
| Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |
Topic Options
datonyb wrote: