ASRock B550M Pro4 No POST

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hello!

Upgrading my son's PC and the Mobo is not posting. 

https://pcpartpicker.com/list/FFmg4d

Mobo - B550M Pro 4
Processor - Ryzen 7 3800X
RAM - Corsair DDR4 32GB (2x16) 3600Mhz
GPU - Geforce GTX 1080

Assembly went fine, all headers and connections are properly seated

Troubleshooting steps taken
- Tested single RAM stick all slots
- Reseated CPU & Checked for bent pins, all good
- Reseated PSU Headers 
- Removed all other header (HD Audio, USB, SATA etc.)
- Tested against known good HID Devices
- Remove Mobo from case and tested in isolation

Continuing to see No POST lights on HID peripherals and Red Lights on DRAM and CPU mobo indicators. 

According to the Mobo specs, should support the RAM fequency and PRocessor with stock BIOS. No way to flash BIOS without POST?

Any leads would be appreciated. 

Cheers! 

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
Kai-Lord Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jul 2024 Location: Seattle Status: Offline Points: 50	Post Options Post Reply Quote Kai-Lord Report Post Thanks(0) Quote Reply Topic: ASRock B550M Pro4 No POST Posted: 22 Jul 2024 at 4:53am
	Hello! Upgrading my son's PC and the Mobo is not posting. https://pcpartpicker.com/list/FFmg4d Mobo - B550M Pro 4 Processor - Ryzen 7 3800X RAM - Corsair DDR4 32GB (2x16) 3600Mhz GPU - Geforce GTX 1080 Assembly went fine, all headers and connections are properly seated Troubleshooting steps taken - Tested single RAM stick all slots - Reseated CPU & Checked for bent pins, all good - Reseated PSU Headers - Removed all other header (HD Audio, USB, SATA etc.) - Tested against known good HID Devices - Remove Mobo from case and tested in isolation Continuing to see No POST lights on HID peripherals and Red Lights on DRAM and CPU mobo indicators. According to the Mobo specs, should support the RAM fequency and PRocessor with stock BIOS. No way to flash BIOS without POST? Any leads would be appreciated. Cheers!

Kai-Lord Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jul 2024 Location: Seattle Status: Offline Points: 50	Post Options Post Reply Quote Kai-Lord Report Post Thanks(0) Quote Reply Posted: 22 Jul 2024 at 5:20am
	Oh, and I popped the CMOS and discharged residual power

Xaltar Members Profile Send Private Message Find Members Posts Add to Buddy List Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24278	Post Options Post Reply Quote Xaltar Report Post Thanks(0) Quote Reply Posted: 22 Jul 2024 at 3:08pm
	Make sure your 8pin CPU power is connected and is the correct connector. The PCIe 8pin power can often be forced into the CPU 8pin header a little too easily.


Kai-Lord Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 22 Jul 2024 Location: Seattle Status: Offline Points: 50	Post Options Post Reply Quote Kai-Lord Report Post Thanks(0) Quote Reply Posted: 24 Jul 2024 at 9:17am
	That a negative on the PCI-E Connector. Made sure it is the 8-pin CPU Power and it took no forcing. I'm thinking its a bad Mobo. Triple checked the compatibility of the CPU: https://www.asrock.com/support/cpu.asp?s=AM4&u=613 RAM is not explicitly on the QVL. Using - CMW32GX4M2Z3600C18 (2x16) QVL - CMK64GX4M2D3600C18 I should at least get to BIOS and get a Memory error if the RAM is not compatible. Still looking for solution here...RMA the board and hunt for something different?