AMD Ryzen Compatible Memory List |
Post Reply | Page <1 1011121314 17> |
Author | |
Lothos
Newbie Joined: 27 Jul 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I got it and was able to get CL14 timings at 3200
HOWEVER I can't get this EVGA GTX 970 to work in PCI 1 slot and instead of I have to put into the PCI 2 slot which is downgraded the card from PCI 3.0 x16 to PCI 1.1 x8 using the ASROCK motherboard. I used two other video cards and they worked fine in the PCI 1 slot so it was just this one card. I have used this card in two older ASUS AM3 motherboards and it worked fine in the PCI x16 slot on those boards so I am not sure why the motherbard wont let it work on the PCI 1 slot.
|
|
vit20a
Newbie Joined: 13 Apr 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
CPU Cooler Noctua L12 SSD Samsung 850 Pro 512Gb SATA3 [MZ-7KE512BW] Seasonic [SSP-300SUG] AMD Ryzen 5 2400G [YD2400C5FBBOX] ASRock Fatal1ty X370 Gaming-ITX_ac Kingston HyperX Predator 3333MHz 2x8Gb [HX433C16PB3K2-16] ---------------------------------------- bios = 4.50 ddr4-3333 = not boot, only reset bios ddr4-3200 = test AIDA = ok, serfing web = ok, games (total war) = 2 min and crach ddr4-2933 = test AIDA = ok, serfing web = ok, games (total war) = ok ---------------------------------------- bios = 4.70 (AGESA 1.0.0.4) ddr4-3333 = not boot, only reset bios ddr4-3200 = test AIDA = ok, serfing web = ok, games (total war) = 2 min and crach ddr4-2933 = test AIDA = ok, serfing web = ok, games (total war) = ok -------------------- DRAM_V = 1.35....1.4V SOC_Voltage procODT = 60ohm no resault, not working.... |
|
AMD Ryzen 5 2400G
ASRock Fatal1ty X370 Gaming-ITX_ac [BIOS=5.30] Kingston HyperX Predator 3333MHz 2x8Gb [HX433C16PB3K2-16] Seasonic [SSP-300SUG] Noctua NH-L12 |
|
_Mael_
Newbie Joined: 24 Apr 2018 Location: PR Status: Offline Points: 124 |
Post Options
Thanks(0)
|
My friend test your system without aida64 this program cause freeze on w10 ver 1803
|
|
vit20a
Newbie Joined: 13 Apr 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
yes tests are not an indicator, but in all games (civ 6, total war arens) in less than a minute - crash works only 2933 |
|
AMD Ryzen 5 2400G
ASRock Fatal1ty X370 Gaming-ITX_ac [BIOS=5.30] Kingston HyperX Predator 3333MHz 2x8Gb [HX433C16PB3K2-16] Seasonic [SSP-300SUG] Noctua NH-L12 |
|
PatriotVipers
Newbie Joined: 19 Apr 2018 Status: Offline Points: 47 |
Post Options
Thanks(0)
|
This is just an FYI for anyone interested in these memory sticks. My system: AMD Ryzen 3 2200G ASRock AB350M Pro4 Patriot Vipers 16GB (2x8GB) @ 2800MHz (Model #: PVE416G280C6K) On the P 4.90 BIOS my system would not boot properly using the XMP setting @ 2800MHz. After updating my BIOS to P 5.00 the system boots up properly @ 2800MHz and I haven't had any stability issues at all since that time. Does anybody know how often ASRock updates their memory compatibility list? This set of Patriot Vipers should be added since BIOS P5.00. Edited by PatriotVipers - 01 Oct 2018 at 2:13am |
|
System: AMD 2200G, ASRock AB350M Pro4, 16GB(2x8GB) 3000MHz Patriot Vipers (running @ 2134MHz *crying*).
|
|
dkrm
Newbie Joined: 07 Dec 2018 Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Hello guys
My build: - AMD RyZen 1800x - ASRock AB350 Pro4 - G.Skill - Ripjaws V Series 16 GB (2 x 8 GB) DDR4-3200 Memory (https://pcpartpicker.com/product/Cf98TW/gskill-memory-f43200c16d16gvkb) With XMP setting @ 3200MHz it runs at the indicated speed. I have done 2 memtest86+ and everything worked fine. I use this build for 2 weeks and no problem whatsoever. |
|
primozz_94
Newbie Joined: 16 Dec 2018 Location: Slovenia Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Helo guys !
Yesterday i got my new system setup, after instaling everything and switching power suply on motherboard gets lighted up in red color, but when i want to boot it just starts for 1sec then is imidiatly turning off, i have everything hooked up to the motherboard itself 24 pin and 8+4pin for power, also i have graphics card properly installed, now i dont know where the issue is, but i think maybe its ram. i also tried only booting with one stick but same results... I checked on asrock support for ram and its not listed on support, setup i use : Asrock Fatal1ty X470 Gamiing K4 Corsair Vengance rgb ram 16gb 2*8gb 2666Mhz modules (CMW16GX4M2A266C16) Ryzen 7 2700 Asus ROG vega 56 Corsair HX1000i Samsung 850 Evo ssd 500gb WD black 1TB Case Coolermaster MC600P Please help me beacuse this thing is so frustrating me |
|
Pockaden
Newbie Joined: 24 Dec 2018 Location: Houston Status: Offline Points: 1 |
Post Options
Thanks(0)
|
Hello all,
I recently purchased the ASRock B450 PRO4 AM4 AMD board and was wondering if the memory I bought along with it will cause any issues. I don't overclock. Just looking for a stable system. The memory I bought is G.SKILL Aegis 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 3000 (PC4 24000) Thanks for the help. |
|
vit20a
Newbie Joined: 13 Apr 2018 Status: Offline Points: 7 |
Post Options
Thanks(0)
|
----------------------------------------
bios = 5.30 (AGESA 1.0.0.6) DRAM_V = 1.35 V2.5 = 2.5 V1.8 = 1.8 V1.05 = 1.08V procODT = 60ohm GearDown = ON RTT_NOM=RZQ/7 RTT_WR=OFF RTT_DARK=RZQ/5 CAD_BUS_Terminators=20 ohm CAD_BUS_timings = 0 ddr4-3200 = test AIDA = ok, serfing web = ok, games (total war) = crash --------- Add CPU Voltage (offset) = 50 VDDCR_SOC (offset) = 35 ddr4-3200 = test AIDA = ok, serfing web = ok, games (total war) = ok --------- Add DRAM_V = 1.35 next step 1.4!!!! (1.36..1.39????? not present) ddr4=3333 = boot windows ok and 30 sec -> crash CLDO_VPPD = where in BIOS ??? |
|
AMD Ryzen 5 2400G
ASRock Fatal1ty X370 Gaming-ITX_ac [BIOS=5.30] Kingston HyperX Predator 3333MHz 2x8Gb [HX433C16PB3K2-16] Seasonic [SSP-300SUG] Noctua NH-L12 |
|
Exsosus2
Newbie Joined: 26 Dec 2018 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
Have now been running Dominator model: CMD16GX4M2B3000C1 as 4 8GB modules (32GB sys mem total)for about 2 years. Stable OC:d at 2900Mhz.
Stockspeed: About 2100Mhz. Very happy with Corsair. Will buy again. |
|
Post Reply | Page <1 1011121314 17> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |