X370 Killer SLI/ac Ethernet Issue |
Post Reply |
Author | |
jdillipl
Newbie Joined: 03 Aug 2017 Location: USA Status: Offline Points: 159 |
Post Options
Thanks(0)
Posted: 13 Aug 2017 at 1:39am |
I think if I drilled down through the features supported in the new Intel on-board NIC chip, the older Realtek 8111 on-board NIC chip, and the old Cisco/Linksys switch, the Intel one supports more features and such. However, I'm up and running (and so is my wife, which is more important), so I'm not going further.
|
|
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
Thank you for the update. I would have hated to never know at least in general what the issue was. I suppose it is possible your old switch developed a problem, but quite a coincidence it started when you changed to a board with an Intel network interface. |
|
jdillipl
Newbie Joined: 03 Aug 2017 Location: USA Status: Offline Points: 159 |
Post Options
Thanks(0)
|
Final update. I bought a new Gigabit switch yesterday, and no problems with networking. The old Gigabit switch must have an incompatibility with the Intel NIC chip on this system board. I found the receipt for when I bought it, and it was 7 years ago, so no problems with replacing it now.
|
|
jdillipl
Newbie Joined: 03 Aug 2017 Location: USA Status: Offline Points: 159 |
Post Options
Thanks(0)
|
OK, update from over the weekend testing. My Gigabit Ethernet switch is cascaded from my wireless router, which has 4 Fast Ethernet LAN connections. I moved all Ethernet cables to the router and removed the Gigabit switch from the environment. Multiple reboots have been stable so far. To me this leaves two possibilities. Either my Gigabit switch is incompatible with the Intel NIC chip on these system boards (an admittedly inexpensive switch), or the Intel NIC chip has issues with Gigabit speed. This week I will be getting a new Gigabit switch to test this out. I suspect the old switch over the Intel NIC chip.
|
|
jdillipl
Newbie Joined: 03 Aug 2017 Location: USA Status: Offline Points: 159 |
Post Options
Thanks(0)
|
No, these are standard cables, about one meter and two meters in length.
|
|
Reinvented
Newbie Joined: 22 Jun 2017 Status: Offline Points: 113 |
Post Options
Thanks(0)
|
jdillipl
Newbie Joined: 03 Aug 2017 Location: USA Status: Offline Points: 159 |
Post Options
Thanks(0)
|
I am using the latest Intel driver, version 22.4 for Windows 7. This was installed through Intel's update utility. And I have run the cable test. It currently shows Cable Quality Status Passed and Cable Integrity Status passed. There are no other tests shown. As I said before, this problem has happened when in the BIOS / UEFI also, so there would be no OS and driver there. Perhaps it is time to replace the switch and cables; however, three different cabled have been used, but connected to the same switch. Maybe it's time to replace the switch. Any other thoughts?
|
|
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
I have the same board with 10' of CAT 6 shielded network cable into the board connected to a simple network switch, and the switch connected via 100' of CAT 6 shielded cable to my router. The Intel network chips on this and my many other ASRock boards work flawlessly at all times. I wish everything else worked as perfectly and issue free as the Intel network chips. Of course I use the Intel network chip drivers, and cannot recall one version that had any issues. That is, except for Windows 10 breaking the Teaming option for boards with multiple network chips. UEFI/BIOS updates have never changed anything about the functioning of the Intel network chips. I shutdown and restart the Ryzen PC all the time, and have never lost the network connection. If you are not using the Intel network driver, that would be the place to start. It sounds like you might be using the Intel driver now. Did you ever run the cable diagnostic test in the Device Manager Properties for the Intel network adapter? I've had seemingly good cables return less than perfect test results. Perhaps ironically, the Realtek network chips are the budget, low price option used to save money on a board. I've used them too, they were Ok, their drivers are certainly not at the level of Intel's. |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
That both boards exhibit this leads me to believe something else is suspect.
On the newest available BIOS release, download and install the latest Intel I211AT wired NIC drivers: https://downloadcenter.intel.com/product/64404/Intel-Ethernet-Controller-I211-AT Post back your results please. Edited by wardog - 04 Aug 2017 at 9:55am |
|
jdillipl
Newbie Joined: 03 Aug 2017 Location: USA Status: Offline Points: 159 |
Post Options
Thanks(0)
|
In April I bought a pair of X370 Killer SLI/ac system boards, Ryzen 7 1700 CPUs, RAM, etc., and assembled computers for both wife and me. On both of these system boards, a reboot CAN cause the built in Intel Ethernet adapter to not recognize that a cable is plugged into it (this is an intermittent problem). I have upgraded the BIOS from whatever the original was (perhaps 2.4?) through all subsequent versions. I have 3.1 on now. Almost all BIOS updates were performed through the BIOS, only once did I use a USB drive. I can get the Ethernet connection to work by either unplugging the Ethernet cable and plugging it back in after 10 seconds or two, or by running the adapter built in hardware diagnostic test. The problem can also occur if I go into the BIOS / UEFI, and not let Windows boot up, so it appears to be a hardware problem and not a Windows driver problem. I am using two to three meter Cat 6 cables, plugged into a Cisco / Linksys 5 port Gigabit switch, and the Intel adapters are set to auto negotiate link speed. Has anybody else seen this problem before? Any fix? Our previous system boards used Realtek 8111 Gigabit adapter, and had no problems with them.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |