Wierd behavior after overclock (x370 killer sli) |
Post Reply |
Author | |
nangu
Newbie Joined: 06 Jul 2017 Status: Offline Points: 120 |
Post Options
Thanks(0)
Posted: 28 Aug 2017 at 11:54pm |
I agree with wardog. Your 3200 DDR were stable at CPU stock, it certainly can change when overclocking the Ryzen. Try upping SoC voltage (max 1.2v) and/or DDR voltage up to 1.4v and retest, or better, leave memory at defaults and start overclocking only the processor, and when you find a stable frequency and voltage, bring in the DDR OC into the equation. Cheers.
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
As datonyb be comes close to saying.............
Don't get stuck thinking one voltage. The SOC voltage and IMC voltages contribute to to keeping the Infinity Fabric whole too. |
|
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(1)
|
overclocking on auto voltage isnt really the done thing
in practice its better to use a fixed/set voltage that is known to work stable with most cpus at that speed ,and then test/try to lower it down gradually as far as your own actual cpu will remain stable HAVING SAID THAT...that theory was blown out the window last weekend when i asisted my friend overclock his ryzen and it jumped directly into a dead lock at established safe 3.8ghz clock and fixed volts..................yet has remained perfectly super reliable when we just set 3.8 on the slider and left every other dam setting at auto......go figure ryzen ! |
|
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
|
DingoBingo
Newbie Joined: 27 Aug 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
I have my Ram XMPed to 3200 CS16 and it posted and I tested it on Aida with no errors and my Vcore is on auto
|
|
parsec
Moderator Group Joined: 04 May 2015 Location: USA Status: Offline Points: 4996 |
Post Options
Thanks(0)
|
Do you have, in the UEFI, OC Tweaker screen, the AM4 Advance(d) Boot Training option enabled (Auto)? If so, set it to disabled. That could be related to your memory OC, if you have a memory OC. A VCore of 1.3V is a bit low for 3.8GHz+, unless you have a very good CPU. Hopefully the 1.3V from AIDA64 (I assume) is not the VID. What is the VCore set to in the UEFI, and what VCore mode are you using? I have the same board, with a 1700X at 3.925GHz, and don't have that behavior. |
|
DingoBingo
Newbie Joined: 27 Aug 2017 Status: Offline Points: 4 |
Post Options
Thanks(0)
|
So I started to see how far I can go with my overclocks on my X370 Killer/Sli/ac with a 1700 and when I reach 3.8+ I see wierd posting behavior such as when I press restart on windows it wont post but if I shut it down via PSU and turn it back on it would post. Mind you I have tested 3.8 at 1.3v on AIDA for 30 min and Prime for another 30min and it was stable I also ran Cinebench 5 times in a row still no crash.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |