X399 Taichi Boot Loop After Flashing to BIOS v1.80 |
Post Reply | Page 12> |
Author | ||
jjoshua2
Newbie Joined: 27 Nov 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
Posted: 02 Dec 2017 at 8:31am |
|
new mobo fixed
|
||
damaya1982
Newbie Joined: 09 Nov 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
Exact same issue I am having. With 1.7, works perfectly fine quad channel, DIMMs in A2/B2/C2/D2, but it does not show the correct amount of memory in OS. Flashing to 1.8 or above and it will not boot with anything in D1 or D2 slots. Edited by damaya1982 - 29 Nov 2017 at 12:21pm |
||
jmmec
Newbie Joined: 22 Nov 2017 Status: Offline Points: 21 |
Post Options
Thanks(0)
|
|
jjoshua2
Newbie Joined: 27 Nov 2017 Status: Offline Points: 6 |
Post Options
Thanks(0)
|
|
I'm having this same problem with a x399 asrock gaming professional I just picked up on black friday sales along with an 1950x and 4x ddr4-3200 g. skill tridentz cas 14 8gb samsung b die (so better ram). It came with bios 1.4 and booted fine with all 4 sticks, but memtest7 only showed 16g. So I flashed to 1.8 and it wouldn't but up with anything in either D1 or D2, but I was able to get it to work with 3 even at ddr4-3200 cas 14 and memtest stable overnight, now seeing 24g.
I flashed to 1.7 and now it boots up and the bios sees quadruple channel memory, but memtest still only sees 24g. I flashed with just two good sticks back to 1.8 and still the same state as before. It seems to be either a bad MOBO or bios. I can swap out sticks and any work fine on 6 of the slots, but none work in the d1 and d2 slots it seems.
Edited by jjoshua2 - 27 Nov 2017 at 11:14pm |
||
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
|
unstable or weird events
a quick google reveals as far as these sticks go , well they dont fly the flag very well for gskill lets just say techpowerup tested them and found very bad overclocking potential even unstable at 3333mhz allthough they did report they got them stable at 3200 16/16/16/16 BUT this was with a well proven intel system that the xmp was designed for anyways back to your ram yes the kits in pairs are harder work than the quads becuase alledgedly............ram kits are suposed to be matched, quite how much effort goes into matching them we'll never know imagine your worst case scenario (and i mean worst case) one pack has sat on shelf for a month and is sent out to you with a pack fresh off the line now 4 sticks at least will be a pretty bad match (compared to a quad kit) anyways enough far fetched examples lets try and see if there is a way to sort out what of the 8 sticks were supposed to be matched as a pair first option would be to study the serial numbers and try to find a pattern or concurrent numbering would be nice try and see if you can use that to match pairs for testing and yes at some stage ,i will try and help you find settings for manual bios options but credit for the settinhs will have to go to two guys named chew and 1usmus who are far more gurus than myself i can just lead you to thier knowledge and help you adjust it for yourself ive had confirmation today from 1usmus that his ryzen timing calculator will work for threadripper and he seems to be working for the option to set the tool automatically to adjust everything for threadripper heres a link for a quick read http://www.overclock.net/t/1640919/ryzen-dram-calculator-overclocking-dram |
||
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
||
damaya1982
Newbie Joined: 09 Nov 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
I ordered 8 sticks of quad channel but they were sent in packs of 2, so I'm not 100% sure these DIMMS are not Dual and I have no idea how to tell. Each DIMM does say the following on the sticker: PC4-25600 16Gx2 DDR4-3200 CL 16-18-18-38 1.35v Intel XMP 2.0 Ready. I am leaving everything in the BIOS at factory defaults, not trying to OC them at all yet. I'm wondering if I can override any settings in the BIOS to get them working. Meanwhile, I will do as you've suggested and test them in pairs. Is there anything exactly that I should be looking for? |
||
datonyb
Senior Member Joined: 11 Apr 2017 Location: London U.K. Status: Offline Points: 3139 |
Post Options
Thanks(0)
|
|
so you have 8 sticks of 16gb ram ?
did you buy them as 4 packs/kits of 2x16 gb sticks ? if so can you try and first find out the matching pairs ? eg which ones came as paired up sticks then try each pair in a set of channels eg for example try a pair in a2 and b2 test for booting /test for xmp. then run a quick memtest then select next pair and repeat this teps 3 times for each pair see if that throws any unusual event with a pair your ram is made with hynix m dies which have been a pain since amd launched ryzen but they should be playing ball ok at stock settings (you have been trying at 2133 stock and not 3200 xmp havnt you ? ) |
||
[url=https://valid.x86.fr/jpg250][/url]
3800X, powercolor reddevil vega64, gskill tridentz3866, taichix370, evga750watt gold |
||
damaya1982
Newbie Joined: 09 Nov 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
Yet Quad channel seems to work perfectly fine in v1.70? I don't get it. I'm highly skeptical at this point that it is my memory considering the impact that BIOS versions seems to have on things. Edited by damaya1982 - 09 Nov 2017 at 10:50am |
||
JUANNY
Newbie Joined: 13 Oct 2017 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
|
Since other users have gotten at least quad channel config working that would leave your memory as the most likely culprit otherwise there would have been more reports posted |
||
Asrock X399 Fatality Pro Gaming Bios 2.0 Threadripper 1950X Cpu cooler Enermax 360 mm TR4 GSkill 64 GB F4-2933C14Q-64GFX Windows 10 X64 PRO Version 1709 Build 16299.19 2X EVGA 1080 TI in SLI mode
|
||
damaya1982
Newbie Joined: 09 Nov 2017 Status: Offline Points: 12 |
Post Options
Thanks(0)
|
|
> did you try the recommended quad channel at A2/B2/C2/D2
Sorry, my edit didn't seem to show up. I added in there that with v1.80, I tried the following (both before and after reverting back to v1.70 and reflashing as per daytonb's suggestion): A1 / B1 / C1 / D1: Boot loop. A2 / B2 / C2 / D2: Boot loop. Edited by damaya1982 - 09 Nov 2017 at 10:21am |
||
Post Reply | Page 12> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |