Intel x99 memory and cpu inquiry... |
Post Reply |
Author | |
LatinPolarBear
Newbie Joined: 01 Jan 2018 Location: New York City Status: Offline Points: 13 |
Post Options
Thanks(0)
Posted: 01 Jan 2018 at 5:22am |
I've been picking up parts over time for a photo and video editing rig. What I have so far and what I plan:
Case: Corsair 550D MB: ASRock x99x Killer PSU: Enermax 800w CPU: Intel Core i7-6950x (want to OC @ 4GHz with Corsair H100i) COOL: Corsair H100i WC unit RAM: *Plan* on 64GB *G.Skill F4-4000C18D-16GTZ* (want to OC @ 4GHz if possible) GPU: *Debating* on GeForce GTX 1080 / 1080 Ti / Titan / Quadro PCIe: *Plan* on BlackMagicDesign DeckLink 4K Extreme 12G Capture & Playback Card PCIe: Asus Thunderbolt EX 3 PCIe: Firewire 800 SDD1: Samsung EVO 850 3D 500GB (boot) SSD2: Samsung EVO 850 3D 1TB (programs) SSD3: Samsung EVO 850 3D 250GB (pagefiling) SSD4: Inland Pro 480GB (image restore drive) HDD: 2x 6TB Toshiba x300 for RAID-0 ODD1: LG DVDRW ODD2: LG Blu-Ray XL-RW OS: Windows 10 Pro x64 My question for everyone and anyone out there is whether or not if anyone has been successful in getting RAM working and stable @ 4GHz??? If so, which memory did you use? I'm considering G.Skill TridentZ 4GHz modules. I had tried reaching out to AsRock tech support, and they can only guarantee what they personally tested on the MB. Personally, I'd like to match my CPU overclock with my RAM overclock (little bit of my OCD playing with my ambition). Any advice and suggestions would be appreciated. Thanks and Happy 2018...
Edited by LatinPolarBear - 11 Mar 2018 at 12:13pm |
|
Always add a little **RAGE** to it...
|
|
Xaltar
Moderator Group Joined: 16 May 2015 Location: Europe Status: Offline Points: 24713 |
Post Options
Thanks(0)
|
On X99? Quad channel RAM? I am going to go out on a limb here and say not a snowballs hope in hell. It may be "possible" to get 4 or more modules to 4ghz but I highly doubt it will be stable and reliable.
Even getting dual channel (2 module) kits to 4ghz and beyond is hard in the best of circumstances. The X99X Killer is not a high end X99 board, if you want to even try to get 4ghz on the RAM you should be looking at the X99 OC formula. Even on that there is no guarantee you will succeed but if any board can do it, it's the OC Formula. Newer boards like the X299 series will probably start seeing 3800 and beyond speeds achieved more readily moving forward. Most 4000+ kits are still just ridiculously high binned RAM (hence the cost) running at near dangerous voltages and loose timings. My 3600 kit for example can only manage ~3800 at it's rated voltage and it is a reasonably high binned kit. Joining the 4000+ RAM club is not easy yet and also not at all worth the cost, not for the amount timings need to be relaxed to achieve it. In most situations a decent 3200, low latency kit will perform almost identically. I hope this helps.
|
|
|
|
LatinPolarBear
Newbie Joined: 01 Jan 2018 Location: New York City Status: Offline Points: 13 |
Post Options
Thanks(0)
|
First off, I appreciate getting a response.
I do know that there are multiple variations of x99 boards, and though the AsRock x99x Killer may not be the baddest mamma jamma on the block, I was hoping that someone had pushed this motherboard. I could maintain stock frequencies and keep both CPU and RAM at 3GHz, however, if it's remotely possible then I'd like to hear the success overclocking stories. I'm going on a business trip and will return in two weeks. When I return, I should have my PNY GTX 1080 delivered. I won't order RAM until I return because of return policies and don't want to get stuck with memory I can't use properly. I welcome anyone and everyone who may be an x99x owner and share how far they pushed their rigs. I am confident that I will be able to overclock. Question is how far could I go...
|
|
Always add a little **RAGE** to it...
|
|
LatinPolarBear
Newbie Joined: 01 Jan 2018 Location: New York City Status: Offline Points: 13 |
Post Options
Thanks(0)
|
Wanted to share a little progress report...
Got an old Xeon cpu to flash BIOS given motherboard didn't recognize 6950x. Upgraded to version 3.10 and successfully boots 6950x. Made some modifications to my list on SSD's and some hardware. Getting closer. Last items I plan on buying are RAM modules, plan on G.Skill F4-4000C18D-16GTZ kits...
|
|
Always add a little **RAGE** to it...
|
|
LatinPolarBear
Newbie Joined: 01 Jan 2018 Location: New York City Status: Offline Points: 13 |
Post Options
Thanks(0)
|
Believe it or not... I'm back and finally booted this bad boy up!!! lol
A lot had been going on in my life, as well as the rest of the post-coronavirus world!!! I finally had time to finish this up with the addition of a TITAN RTX instead of a GeForce card. Flashed the BIOS from 3.10 to 3.40 and 6950x recognizes. Only hiccup I had was I did get a BSOD when dabbling with the BIOS settings. Was able to repair Win10Pro installation thank God. Anyway, reaching out to anyone who's got this board or has experience OC'ing it with success. G |
|
Always add a little **RAGE** to it...
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |