X399 Fatal1ty not booting with code 62 |
Post Reply | Page 123 4> |
Author | |
alexmaz
Newbie Joined: 03 Feb 2018 Status: Offline Points: 25 |
Post Options
Thanks(0)
Posted: 03 Feb 2018 at 7:41am |
Hello,
I just built a machine with a Threadripper 1950x, 32 GB G.Skill 3200 Mhz F4-3200C16Q-32GTZB, an Asus GTX 1080Ti turbo, 2 x Samsung EVO 256 GB M.2, a Corsair RM850i and a Enermax LiqTech TR4 360. The pc won't boot and it stops on code 62. The manual says "Chipset initialization error. Clear CMOS or reset". It didn't work. I also tried to remove the battery. Boot with 1 stick of ram. Same problem. I know the graphic card works because it was on my old system. Any idea? Thanks |
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
this may be related to pci-e devices
try to reseat gpu, or try different one |
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
alexmaz, these codes: http://forum.hwbot.org/showthread.php?t=16017
say 62 - Installation of the PCH Runtime Services. Please post more of your specifications as in my signature. Include your UEFI/BIOS and OS version and power supply. Make sure you have the CPU 4-pin and 8-pin power connectors on the CPU and the PCIe power connectors on the video card. Make sure the 4-pin connectors are not rotated 90 degrees. Try booting with nothing but the CPU installed and post your code. Open the UEFI and hit F9 then F10. Try different PCIe slot for your Video card. Enjoy, John. |
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
alexmaz
Newbie Joined: 03 Feb 2018 Status: Offline Points: 25 |
Post Options
Thanks(0)
|
Thanks for the answers! I changed slot to the graphic card and now it boots. I updated the bios to 2.00 but it only see 16 gb of ram. I have 4 sticks of F43200C16Q-32GTZB G.SKILL. I tried to switch the ram around, but it only see those in the slots A2 and B2.
Both the 4 pin and 8 pin connectors are connected. |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
1) Latest BIOS 2.00 flashed?
2) 4-Pin, 8-Pin, AND 24-Pin power supplied to the MB from the PSU? 3) Memory, see below for correct placement of 1, 2, and 4 sticks 4) Memory, these slots you must, MUST, make positive the stic(s) get seated, fully. Double check them. Begin using 1, ONE, stick in A1 that it boots. Work? Boot? Place a second stick in C1(now A1+C1) that it boots Work? Boot Now place the other/last two into D1 and B1(now D1+C1+A1+B1) that it boots Work? Boot? Post back please |
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
alexmaz
Newbie Joined: 03 Feb 2018 Status: Offline Points: 25 |
Post Options
Thanks(0)
|
Hey Wardong, thanks for your answer. The manual says to use B2 A2 C2 D2. I'll try your configuration.
|
|
alexmaz
Newbie Joined: 03 Feb 2018 Status: Offline Points: 25 |
Post Options
Thanks(0)
|
Nothing, it doesn't see the sticks in c1 d1 or c2 d2.
|
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
wardog
Moderator Group Joined: 15 Jul 2015 Status: Offline Points: 6447 |
Post Options
Thanks(0)
|
Post Reply | Page 123 4> |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |