USB and PCIe problem with my X399 Taichi |
Post Reply |
Author | |
hairy
Newbie Joined: 06 May 2018 Status: Offline Points: 4 |
Post Options
Thanks(0)
Posted: 06 May 2018 at 3:06pm |
Hi MisterJ, How did you go getting this sorted out? I can not get my RME AIO soundcard to work in PCIE3 (PCIe 2.0 x1 slot) PCI Express x1 lane, no matter what I do? But it works fine in all of the other PCI Express x16/8 lanes? Soo is there something I
am missing here? Some settings in the UEFI BIOS to make my USB rear
panel USB 3.0 Port to work properly and my PCIE3 (PCIe 2.0 x1 slot) PCI
Express x1 to work? I am unable to detect anything in my PCIE3 either and am after an avenue to follow this issue up on, I have a video capture card but a card is a card when it don't work. Cheers, hairy. |
|
1950X, X399 Taichi motherboard, 32GB FlareX F4-3200C14d-16GFX (x2), Enermax 360 AIO, Corsair HX750 PSU, Zotac Geforce GTX 1060, Blackmagic Intensity Pro, Samsung 960 EVO Ubuntu, SanDisc SSD PLUS WIN10
|
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Sorry, Nacka67, you are absolutely correct and I was using the X370 Taichi manual and therefore very wrong. The only restriction seems to be the U.2 one you pointed out. Have you tried to see if powering up with a rear USB 3.0 plugged worked? If you installed both the Allin1 and the 18.10 from AMD then I am not sure. In general you should not use the drivers from ASRock. Please use only the AMD chip set drivers. The exception is the RAID drivers should be ASRock. All my drivers I got from the vendors (Intel, Realtek, etc not ASRock). ASRock drivers tend to be down level. Only RAID and Aquantia (10 GBps LAN) drivers come from ASRock because they have been modified. I would suggest you open an ASRock support ticket and ask about the RME PCIe problem. Please let us know what you learn. Thanks and enjoy, John.
|
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
Nacka67
Newbie Joined: 27 Oct 2017 Location: Sweden Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Thanks for your help MisterJ, I'm so glad I'm not alone with my problem. I got tired and went out and bought a usb 3.1 hub so now the parts I want to plug in work. Asrock and AMD need to fix this problem for usb 3.0, it is not stable on this platform. I have the latest AMD Chipset Drivers 2018-02-12 installed? MisterJ, do you think it's true even if you have M2_3 occupied? The manual says this only: * If U.2 Connector is plugged, M2_1 will be disabled MisterJ, PCIE3 (PCIe 2.0 x1 slot) PCI Express x1 lane is not a x16 lane! I can't see anything about the "* If M2_1 is occupied, PCIE4 will be disabled." in the manual? I'm very grateful for all the great suggestions and help. :-)
Edited by Nacka67 - 16 Feb 2018 at 1:08am |
|
MisterJ
Senior Member Joined: 19 Apr 2017 Status: Offline Points: 1097 |
Post Options
Thanks(0)
|
Nacka67, I have the X399 FGP and have a rear USB 3.0 socket problem at power up. I am aware of at least one other user with the same problem. If I power up my system with nothing plugged into the rear 3.0 sockets, the sockets will not work. If I power up with a USB stick (or mouse, or etc) they all work OK. Top and rear 3.1 always work. However, I never see any error messages. Where are you seeing your messages, logs? Please try it with at least one socket plugged at power up and see if it works. I reported this to ASRock, but they refused to try it with nothing plugged, so it did not fail. Enjoy, John.
EDIT: Get latest chip set drivers (18.10) here: https://support.amd.com/en-us/download What are these? : Latest AMD all in 1 driver ver17.10.3401 If they are from ASRock, please forget them. Is your RME the Rme Hdspe Aio Pcie Card? EDIT "* If M2_1 is occupied, PCIE4 will be disabled." "PCIE3 (PCIe 3.0 x16 slot) is used for PCI Express x8 lane width graphics cards." Edited by MisterJ - 15 Feb 2018 at 9:30am |
|
Fat1 X399 Pro Gaming, TR 1950X, RAID0 3xSamsung SSD 960 EVO, G.SKILL FlareX F4-3200C14Q-32GFX, Win 10 x64 Pro, Enermx Platimax 850, Enermx Liqtech TR4 CPU Cooler, Radeon RX580, BIOS 2.00, 2xHDDs WD
|
|
Nacka67
Newbie Joined: 27 Oct 2017 Location: Sweden Status: Offline Points: 7 |
Post Options
Thanks(0)
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
Nacka67
Newbie Joined: 27 Oct 2017 Location: Sweden Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Thanks kerberos_20
1) It's no problem with the drivers just with the rear panel USB 3.0 Ports not work properly (8 x USB 3.0 Ports 1-8)? The same hardware and drivers are working fine in USB 2.0, USB 3.0 (USB 3.0 Header USB3_9_10 and USB 11_12) and in usb 3.1. So it's not a Microsoft driver problem here. 2)Yes, windows doesnt see it?
|
|
kerberos_20
Senior Member Joined: 06 Dec 2017 Location: czech republic Status: Offline Points: 3657 |
Post Options
Thanks(0)
|
Nacka67
Newbie Joined: 27 Oct 2017 Location: Sweden Status: Offline Points: 7 |
Post Options
Thanks(0)
|
Hello I have a two very strange problem with my motherboard Taichi X399? 1. I can not get the I/O rear panel USB 3.0 Port to work properly (8 x USB 3.0 Ports 1-8)? It refuses to load the driver properly and I keep get this error code, This device cannot start. (Code 10) An invalid parameter was passed to a service or function? My front usb 3.0 (USB 3.0 Header USB3_9_10 and USB 11_12), usb 2.0 and rear usb 3.1 works perfectly with exactly the same hardware with generic drives from Windows 10. Soo there is no problem with my external hardware or with the drivers, otherwise they would not work here either. 2. I can not get my RME AIO soundcard to work in PCIE3 (PCIe 2.0 x1 slot) PCI Express x1 lane, no matter what I do? But it works fine in all of the other PCI Express x16/8 lanes? Soo is there something I am missing here? Some settings in the UEFI BIOS to make my USB rear panel USB 3.0 Port to work properly and my PCIE3 (PCIe 2.0 x1 slot) PCI Express x1 to work? I've tried everything I could find in bios without success. Would really appreciate your help with this. Want to know if it's just my motherboard or if there are several that have the same problem? Not working Working My system: Asrock Taichi X399 with 2.0 BIOS (no overclock) Threadripper 1950X G.Skill Trident Z RGB (Samsung B-die) F4-3200C14Q64GTZR (running at 2933 Mhz). Corsair PSU AX1200i Enermax LiqTech TR4 360 GTX 1080Ti Samsung SSD Windows 10 Pro with all updates Latest AMD Chipset Drivers 2018-02-12 Latest AMD all in 1 driver ver17.10.3401 Edited by Nacka67 - 15 Feb 2018 at 7:19am |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |