![]() |
Problem with HyperX HX434C19FW/16 |
Post Reply ![]() |
Author | |
amalyshev ![]() Newbie ![]() Joined: 17 Aug 2018 Status: Offline Points: 24 |
![]() ![]() ![]() ![]() ![]() Posted: 17 Aug 2018 at 7:51pm |
I have a compatibility issue between main board Z370 Taichi and HyperX HX434C19FW/16. As recommended, I installed them in slots A2, B2. I was able to install Windows 10, but Intel memory stress tests freezes with native memory speed (3466) It freezes even with 3200. I was able to pass stress tests when setting DDR clock to 3000. Is it a memory compatibility issue or something is broken?
|
|
![]() |
|
klimbo13 ![]() Newbie ![]() ![]() Joined: 27 Aug 2018 Location: roma Status: Offline Points: 5 |
![]() ![]() ![]() ![]() ![]() |
![]() |
|
amalyshev ![]() Newbie ![]() Joined: 17 Aug 2018 Status: Offline Points: 24 |
![]() ![]() ![]() ![]() ![]() |
Whatever... I have two HyperX HX434C19FW/16 memory modules. Both of them work fine in slot A2 on 3466 MHz, but the system freezes when I install them in slot B2. With a frequency reduced to 3000 MHz they work even in slot B2. When I install both modules in A2/B2 as recommended by the board manufacturer, the system only works on 3000 MHz DDR frequency and freezes on a higher one. I am not sure what to do. ASRock support suggested that I replace CPU. This is very frustrating.
|
|
![]() |
Post Reply ![]() |
|
Tweet
|
Forum Jump | Forum Permissions ![]() You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |