x870e Nova WiFi POST error 21 |
Post Reply |
Author | |
newlander
Newbie Joined: 12 Oct 2024 Status: Offline Points: 50 |
Post Options
Thanks(0)
Posted: 12 Oct 2024 at 9:32pm |
I have a faulty board I think. 95% of the time when starting it I get three long beeps (I had to add my own speaker) and code 21 on the panel. Renegotiating the RAM in the slots sometimes fixes it and then it runs flawlessly, but there's no guarantee it will boot again the next day, even if the device is unmoved.
Can I get confirmation from the board that code 21 is a memory addressibility issue before I RMA this? I assume it just has a defect I have the DIMM slots making the connection unreliable. |
|
newlander
Newbie Joined: 12 Oct 2024 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Forget it, I just RMA'd it
Google users: code 21 means unable to address RAM. Return your board if it's in properly. |
|
newlander
Newbie Joined: 12 Oct 2024 Status: Offline Points: 50 |
Post Options
Thanks(0)
|
Hi everyone, third and hopefully last post here. I wasn't going to weigh in further but this result appears very close to the top when googling "x870e Nova WiFi" so I know people will be seeing it.
Code 21 ended up being bad RAM. It doesn't make sense that it would be bad RAM because booting in single-channel mode (eg, one stick in A2 or B2) worked fine, and rearranging the modules did nothing, and wiggling the RAM appeared to do the trick sometimes -- but it was the RAM. Don't do what I did and RMA the motherboard, then the processor, and then the RAM -- if it's code 21, the RAM is guilty until proven innocent by another set of modules. Remember - when trying a different module, don't be tempted to use whatever other modules you have lying around. The motherboard is only compatible with DDR5, not anything earlier. Cheers from London. newlander |
|
tuxtux
Newbie Joined: 03 Dec 2024 Location: Jakarta Status: Offline Points: 15 |
Post Options
Thanks(0)
|
Hi newlander,
I got a similar POST code AA-21 using x870e Taichi Lite. Thank you for your information regarding booting in single-channel mode, it works for me too. Just curious what module brand did you use? And does the POST 21 disappear after you RMA the RAM? Thanks in advance |
|
mw6038
Newbie Joined: 7 hours 52 minutes ago Location: Poland Status: Offline Points: 30 |
Post Options
Thanks(0)
|
i had the same thing but i thought reseating the cpu would help. while doing that i bent 2 pins on Nova. Now hopping they would send me a replacement board. Overall very bad experience with such an expensive board. RAM i used was G skill Neo which should be compatible.
|
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |