ASRock.com Homepage
Forum Home Forum Home > OverClocking(OC) Zone > OC Technical Discussion
  New Posts New Posts RSS Feed - Can't pass multiplier x38
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

Can't pass multiplier x38

 Post Reply Post Reply
Author
Message
Artyni View Drop Down
Newbie
Newbie


Joined: 25 Jan 2019
Status: Offline
Points: 3
Post Options Post Options   Thanks (0) Thanks(0)   Quote Artyni Quote  Post ReplyReply Direct Link To This Post Topic: Can't pass multiplier x38
    Posted: 25 Jan 2019 at 2:42am
Dear members,

I thought it was time to overclock my processor.
I own a Fatal1ty Performance p67 with an i7 2600k and run it on a w10.
But I can't seem to find a way to get my multiplier higher then x38.

I've tried downgrading the bios, which actually resulted in a bad flash. Which took me 6 hours to undo, kekeke.
The bios version is back to 2.2 now.

In Windows I do use the high performance energy setting.
All my drivers are up to date, even tried downgrading them with the given drivers from the mobo page provided by ASRock.

With the overclocking tool provided by ASRock I can't get pass the x38 as well.

With the premade OC in the UEFI Bios, when I set them, nothing changes at all. The Multiplier will always be at 35 in Windows. Even if I put in manual on 38, or with the premade OC's, always 35.

The DDR3 Memory I use should be able to get the speed of 1600mhz, but in the bios and windows it only read/uses 1333mhz.

After alot of googling, ny thoughts are that it's a software related problem, something like the Intel ME driver that does not work well with the mobo.
But I can't find a solution or work around for it.

Could it be it's Windows 10?

Does anyone else have an idea which I can try?

Thanks in advance,

Regards,
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.125 seconds.