ASRock.com Homepage
Forum Home Forum Home > Technical Support > AMD Motherboards
  New Posts New Posts RSS Feed - New build constantly shutting. 1920x on x3999 taic
  FAQ FAQ  Forum Search Search  Events   Register Register  Login Login

New build constantly shutting. 1920x on x3999 taic

 Post Reply Post Reply
Author
Message
Zsadik64 View Drop Down
Newbie
Newbie
Avatar

Joined: 02 Aug 2020
Status: Offline
Points: 4
Post Options Post Options   Thanks (0) Thanks(0)   Quote Zsadik64 Quote  Post ReplyReply Direct Link To This Post Topic: New build constantly shutting. 1920x on x3999 taic
    Posted: 02 Aug 2020 at 9:47pm
I am having issues with my new build shutting down after start up. It will stay on for 2 to 7 minutes and shut down. When in the bios or at the asrock app in windows it shows the cpu at roughly 60c at start up. It climbs to roughly 70 or just about 70 and shuts down.

All other components show at around 27c. Room is at 22c.

I have a corsair h150i rgb xt AIO (360mm with 3 fans). I have wiped off all paste and rei stalled with no change.i have felt the tubes right next to the pump and can feel the liquid moving.


I have bios 3.9 which came with the mother board.
CPU is 1920x threadripper.
Ram is a trident 3600 (4x16gb)
Hard drives are wd black m.2 1tb and a scan disk 2tb ssd.
1 have a 1200watt psu. Checked this with thermaltake psu device and shows good.

Should I use a different bios version? Should I buy new cables since that is the only thing not yet replaced except the psu?

Any help is greatly appreciated.
Back to Top
ThreeDee View Drop Down
Senior Member
Senior Member
Avatar

Joined: 24 Jul 2019
Location: Billings,MT
Status: Offline
Points: 2396
Post Options Post Options   Thanks (0) Thanks(0)   Quote ThreeDee Quote  Post ReplyReply Direct Link To This Post Posted: 03 Aug 2020 at 3:05pm
When you pull the H150i off, is it making good contact with your CPU? ample mounting pressure?
|Ryzen 5 5900|ASRock X570 Taichi-BIOS 4.60|2x16GB HyperX Predator RGB 3200@3600 1:1 IF|ASRock RX 6700XT|2 x PCIe 4.0 M.2 Drives for OS & Games|850 WTT Seasonic 80+ Titanium PSU|Noctua NH-D15|
Back to Top
Zsadik64 View Drop Down
Newbie
Newbie
Avatar

Joined: 02 Aug 2020
Status: Offline
Points: 4
Post Options Post Options   Thanks (0) Thanks(0)   Quote Zsadik64 Quote  Post ReplyReply Direct Link To This Post Posted: 03 Aug 2020 at 6:45pm
It is making good contact. This is seen by how the paste has spread on the cpu. The pressure is good.

It seems the cpu is either running hot or falsely hot. This coller was able to tun a 3970x on full speed for a hour with no issues.

I have finally got windows to load but still having issues with it shutting off.

Using asrock tunning program in windows was able to set the computer on power saving mode. This gave me 30 minutes of use prior to shut down but I would like to be able to use this build at the speed of is capable of.

Is there something I am missing.

Can I raise the temperature that causes the computer to shut down? Could anything else be causing it to shut down?
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.04
Copyright ©2001-2021 Web Wiz Ltd.

This page was generated in 0.125 seconds.