X570 Creator getting "MCU is Empty"

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Bios - 3.5
MB - X570 Creator
PolychromeRGB(v2.0.102)
Windows 10 64bit - 2H1H OS Build 19043.1081

I've tried multiple versions of this software (ASRock, you made it VERY hard to find the latest version, FYI) and it worked 1 time, then nothing but "The MCU is Empty" after that.  I was getting the "Access Violation" issue before moving to v102, now the software still gets "The MCU is empty" but will close itself now. 
 This is happening with nothing plugged in, so it's not even working on the board itself.  I've tried updating the firmware from the "Bin" dir, but it gets an error on erasing on each step, but the file and board validate previous to that in the updater.  I'm at a lose at this point.  I don't know what else to try.  This is my first time working with Polychrome and an ARGB board, so any help is appreciated.

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
jcditto Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 02 Jul 2021 Location: Arlington, TX Status: Offline Points: 20	Post Options Post Reply Quote jcditto Report Post Thanks(0) Quote Reply Topic: X570 Creator getting "MCU is Empty" Posted: 02 Jul 2021 at 11:59pm
	Bios - 3.5 MB - X570 Creator PolychromeRGB(v2.0.102) Windows 10 64bit - 2H1H OS Build 19043.1081 I've tried multiple versions of this software (ASRock, you made it VERY hard to find the latest version, FYI) and it worked 1 time, then nothing but "The MCU is Empty" after that. I was getting the "Access Violation" issue before moving to v102, now the software still gets "The MCU is empty" but will close itself now. This is happening with nothing plugged in, so it's not even working on the board itself. I've tried updating the firmware from the "Bin" dir, but it gets an error on erasing on each step, but the file and board validate previous to that in the updater. I'm at a lose at this point. I don't know what else to try. This is my first time working with Polychrome and an ARGB board, so any help is appreciated.
	James C Ditto