H470M-HDV not start with PCI-E RAID Controller |
Post Reply |
Author | |
YouRQXXL
Newbie Joined: 22 Jul 2021 Status: Offline Points: 20 |
Post Options
Thanks(0)
Posted: 22 Jul 2021 at 4:30pm |
Hello
I have a problem with the H470M-HDV motherboard. I bought a Digitus DS-33160 RAID controller and I have 2 Goodram CX400 SSDs inserted into it. When the card is inserted into the PCI-E connector, the commupter freezes at the start before entering the BIOS, you can see the A2 code and nothing can be done. You cannot enter the motherboard BIOS (F2 or DEL), you cannot enter the RAID controller utility from the motherboard (CTRL + I) and of course you cannot enter the RAID controller utility from the PCI-E card (CTRL + M). Tried changing from Auto to GEN1 / GEN2 / GEN3 PCI-E settings - no changes Tried upload BIOS beta 1.12 - no changes I put a PCI-E graphics card in this slot - it works without a problem. I tested the RAID controller card on 3 other computers with Gigabyte and MSI motherboards - the card works without any problems, can enter the settings (CTRL + M), set up a RAID array and install the system on it. |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |