b550m steel legend led start flashing/blinking |
Post Reply |
Author | |
Djaxlil
Newbie Joined: 13 Sep 2021 Location: Algeria Status: Offline Points: 20 |
Post Options
Thanks(0)
Posted: 13 Sep 2021 at 7:40pm |
My matherbord led start flashing after turning off the psu i even tried to remove all the cables it works normally but sometimes when i shut it off it start blinking and never stops till i plug it back and turn the psu on
|
|
ASRock_TSD
ASRock_Official Joined: 20 Mar 2015 Status: Offline Points: 8532 |
Post Options
Thanks(0)
|
Dear Djaxlil,
Thank you for choosing ASRock and contacting us. For this case, we would suggest flashing the RGB firmware manually to try. Please refer to the following steps. 1.Uninstall the ASRock Polychrome and other RGB control program in Control Panel and make sure the ASRRGB folder in C:\Program Files (x86)\ASRock Utility\ is disappear. 2. Restart the PC and download the latest ASRock Polychrome utility from below link and install it. ASRock Polychrome RGB ver:2.0.107: https://download.asrock.com/Utility/RGB/PolychromeRGB(v2.0.107).zip 3. Type "CMD" in Windows search bar and right click to choose "Run as administrator". 4. Go to RGB app installation folder in Command Prompt by typing "cd C:\Program Files (x86)\ASRock Utility\ASRRGBLED\Bin" 5. Flash the RGB chip by using the following command "WriteFW.bat" After step 5, kindly wait about 30 sec and the FW flash will finish. Thank you, Best wishes, ASRock TSD |
|
BrincosNation
Newbie Joined: 29 Feb 2020 Status: Offline Points: 60 |
Post Options
Thanks(0)
|
hi, why b550 cant customize led by led, like b450m does?? i mean, b450m can customize leds with different colors in the same component, b550 is not able, how can i fix this? |
|
Post Reply | |
Tweet
|
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |