M.2 undetected on Z590-Phantom ITX

I had to go into uefi and select the nvme and format the drive. If you cannot format in uefi then go into windows (assuming you have windows) and settings>system>recovery and format it just before your about to reinstall windows... (and afterwards of course back out and don't reinstall windows) then when back in windows, go to disk management and assign a drive letter to your new nvme drive. You may need to do a quick format again from within Disk Management. The drive should be visible in File Explorer now.
I hope this helps.

according to specification on their website....unless you have an 11 gen core processor, the Hyper m.2 wont work. only the ultra m.2 slots will work.

Hi TheBrow,

Thank you for your post.

To get the maximum number of graphic cards, this motherboard uses all of the PCIe lanes for the PCIe slots.

So the M.2 slot on H510 Pro BTC+ can only support M.2 SATA Type SSD.

All the best
ASRock TSD