Asrock Z370 Pro4 - Chassis Fan

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi everyone,
I have some questions about the  Chassis Fan connectors on my motherboard. If I connect a 3 pin fan to one of these connectors, will I be able to control its speed in the bios? Or maybe fan must be 4 pin? And the last question is can I connect the fan controller to chassis fan connector and control several fans?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
mateuszsokol Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: 24 Dec 2022 Status: Offline Points: 20	Post Options Post Reply Quote mateuszsokol Report Post Thanks(0) Quote Reply Topic: Asrock Z370 Pro4 - Chassis Fan Posted: 24 Dec 2022 at 5:02am
	Hi everyone, I have some questions about the Chassis Fan connectors on my motherboard. If I connect a 3 pin fan to one of these connectors, will I be able to control its speed in the bios? Or maybe fan must be 4 pin? And the last question is can I connect the fan controller to chassis fan connector and control several fans?

threadzipper1957 Members Profile Send Private Message Find Members Posts Add to Buddy List Senior Member Joined: 05 Mar 2022 Status: Offline Points: 9335	Post Options Post Reply Quote threadzipper1957 Report Post Thanks(0) Quote Reply Posted: 21 Jun 2023 at 10:25pm
	3 Pin fans have the following layout 1. Ground 2. variable voltage up to 12 Volt 3. RPM sensor 4 pins fans have a different layout 1. Ground 2. Fixed 12Volt 3. RPM sensor 4. PWMJ steering, so the pulse frequency sets the fan speed. A lot of 3 pin fans run at full speed because of the fixed 12 volt, when using a 4Pin header
	Kind Regards