Print Page | Close Window

Help

Printed From: ASRock.com
Category: OverClocking(OC) Zone
Forum Name: OC Technical Discussion
Forum Description: OC enthusiast's tech talk
URL: https://forum.asrock.com/forum_posts.asp?TID=10005
Printed Date: 14 Oct 2024 at 2:51am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: Help
Posted By: HyperZeroYt
Subject: Help
Date Posted: 25 Oct 2018 at 6:14am
I was messing around in the computers boot menu and switched things around not knowing what I'm doing and now after saving and exiting it gave me a no signal connection on my displays and my keyboard and mouse don't respond on the computer. As if the computer is in sleep mode. Please help me



Replies:
Posted By: Globespy
Date Posted: 07 Nov 2018 at 2:02am
" rel="nofollow - I'm assuming you got this resolved?
If you mean by 'boot menu' were you talking about BIOS on your board or Windows boot options in Windows?
If the BIOS, simple fix is a full clear CMOS - I usually always just remove all power and then take out the little round BIOS battery for 5 minutes whilst following your BIOS reset instructions (usually jumpers unless your board has a 'button' on the board to reset CMOS).

If Windows, then there's plenty of resources to help you boot to safe mode and restore to an earlier time which will resolve the issue.

But hopefully you are back up and running!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net