X870E Nova Force IGP on boot.
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=101298
Printed Date: 06 Sep 2025 at 11:21pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X870E Nova Force IGP on boot.
Posted By: DaaQ
Subject: X870E Nova Force IGP on boot.
Date Posted: 16 Mar 2025 at 6:07am
Hello all, I am having an issue with DGPU installed hanging on code 97, all BIOS defaults have been reset, I changed primary graphics to IGPU, but as long as DGPU is installed it will hang on 97, monitor will show HDMI1 which is IGPU connection, and DGPU is DP1 but I cannot get through post unless I pull at least one power connector on DGPU. But then IGPU shows as gpu0 and I need DGPU to be set to 0.
IDK if it is any security settings, or if the GFX option with no help string should be off or on. But I have went though as much as I could to try to force boot from IGPU with the DGPU installed and connected completely.
CSM is a question because it says to turn off for DGPU, and the Promintory boot options 1st is set to uefi only.
Kind of at a loss of how to force it to boot with both gpus installed and connected. This is related to vbios flashing, but I think I have a BIOS setting incorrect to be able to recover.
Any help would be appreciated. It is a strange behavior, I am on MOBO BIOS 3.20
Thanks, DaaQ.
-------------
ASRock X870E Nova WiFi 9800X3D 7900XTX Nitro + SS TX1000 Focus?
Custom Water Cooling
|
Replies:
Posted By: DaaQ
Date Posted: 18 Mar 2025 at 8:49am
400+ views and no response?
OK what is debug 97? DXE_CON_OUT_CONNECT that is what is in the debug manual.
ANY help would be appreciated, not a bad slot, its a bad VBIOS flash. I was not aware there were 3 positions on the DGPU, 1 towards ports #3 is software, position 2 (middle) secondary or quiet bios, then position 3 towards PCIE connectors #1 OC BIOS.
I cannot get board to boot from IGPU while DGPU is fully connected. I feel it is BIOS setting. OR the code 97 with the short help string. What does DXE_CON_OUT_CONNECT actually mean?
-------------
ASRock X870E Nova WiFi 9800X3D 7900XTX Nitro + SS TX1000 Focus?
Custom Water Cooling
|
|