No Video Signal after build
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10204
Printed Date: 23 Jul 2025 at 6:39am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: No Video Signal after build
Posted By: fmayer89
Subject: No Video Signal after build
Date Posted: 18 Nov 2018 at 10:41am
|
Not having any luck with getting a video signal. Here are the parts of this build: ASRock B450M Pro4 AMD4 motherboard Ryzen5 1600 cpu 2x8gb Corsair Vengeance LPX 3000mhz DDR4 ram CMD32GX4M2B3000C15 (someone has successfully used this ram in another forum) Zotac GTX 1050ti Corsair RM550x power supply -Checked all connections, they are solid -Checked memory slot configs, A2/B2 -Tried booting using onboard video and video card connections -Tried booting with only one stick of memory Power does go to the board. All the fans turn on. I followed the manual's configurations. Not sure what I am missing. Even tried updating the bios via usb (again, no display) but not sure if it updated but the drive felt warm like it had been used. Any other suggestions? |
Replies:
Posted By: basedmeezus
Date Posted: 18 Nov 2018 at 7:41pm
|
is bios/uefi showing up? if not try another wire. also can try getting a beeper and see how many beeps ur getting on system bootup ------------- 
|
Posted By: fmayer89
Date Posted: 20 Nov 2018 at 1:39am
|
Nothing is showing up at all. no signal to the screen whatsoever. So no bios/uefi. Yeah I just got the mb speaker in today. The B450M Pro4 didn't come with one. So going to try that when the replacement cpu chip comes in. Technician friend thought it may have been damaged in transit. Amazon replacement quite simple thank god. Will update tomorrow with speaker data. |