Is my Motherboard the Problem???
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10327
Printed Date: 29 Jan 2025 at 8:46am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Is my Motherboard the Problem???
Posted By: scjconsulting
Subject: Is my Motherboard the Problem???
Date Posted: 06 Dec 2018 at 12:08am
|
Taichi A320M-DG Motherboard Threadripper 1950x 32GB 1070ti Graphics CyberPowerPC Built The computer was hung with a stopped clock display when I came back. I shut it down and restarted it. It looks like it starts up for about 15 seconds and then goes into a stop & start loop. Never booting and does not boot the DVD drive.  ------------- scjconsulting |
Replies:
Posted By: scythefwd
Date Posted: 06 Dec 2018 at 1:47am
|
The only A320M-DG on asrocks website doesnt support the threadripper line of processors, its an am4 socketed board. How many times did it go through the boot loop.. could it be doing the memory training cycle? ------------- threadripper 1950x at 3.9ghz 32gb gskill tridentz 3200 @3333 samsung 850 evo CM 1k watt psu Enermax tr240 cooler s340 case |
Posted By: scjconsulting
Date Posted: 06 Dec 2018 at 4:10am
|
I have a small A320M-DGS box that was supplied by CyberPowerPC holding books, etc. from the build of the system. It was not big enough to hold the Taichi motherboard so I always wondered. Let's say for sure that I have a Taichi X399 motherboard, that I had to RMA return to ASRock in April because of a firmware problem. I don't know how to check for any memory problems. Should I remove some sets (there is 4 x 4GB & 2 x 8GB)? ------------- scjconsulting |
Posted By: scjconsulting
Date Posted: 06 Dec 2018 at 5:12am
|
Eureka!! I looked at my motherboard and when it was booting it stopped at C0. I removed the 2 x 8GB boards and up it came. Thanks. [:)] ------------- scjconsulting |