Taichi X470 witch G.SLIKK GTZRX
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10393
Printed Date: 23 Jul 2025 at 9:30pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Taichi X470 witch G.SLIKK GTZRX
Posted By: emistrzu
Subject: Taichi X470 witch G.SLIKK GTZRX
Date Posted: 13 Dec 2018 at 2:06am
|
Is it possible to achieve DDR4-2933 on Taichi X470 (ryzen 5 2600x) with G.Skill F4-3200C14-8GTZRX ? CPU-Z shows 1066 Mhz on auto settings. Please help |
Replies:
Posted By: xhue
Date Posted: 13 Dec 2018 at 2:22am
|
Did you enable XMP in BIOS? Did you update to the latest BIOS? It should be fairly easy to achieve even 3200MT/s with this RAM. Also, read the manual for which RAM slots to use depending on your configuration and capacity. |
Posted By: emistrzu
Date Posted: 13 Dec 2018 at 2:47am
|
thanx for answer. wow 3200 would be nice ! BIOS is upgraded, slots A2 and B2, I tried witch XMP Profile enabled but no luck. I can send photo with BIOS settings |
Posted By: xhue
Date Posted: 13 Dec 2018 at 3:58am
|
1st - how many memory sticks do you have? According to https://www.reddit.com/r/Amd/comments/62vp2g/clearing_up_any_samsung_bdie_confusion_eg_on/ you may have non B-die chips. Non Samsung B-die chips are hard even for Gen.2 Ryzens (Zen+) CPU, which is yours. Check with Taiphoon as described in the link above. Sole fact that XMP won't kick in means you most likely don't have Samsung chips in your memory. If you have just 2 sticks of RAM and XMP won't kick in, you'd most likely have to OC by hand. You may also want to try https://www.jzelectronic.de/jz2/index.php for BIOS 1.62, or wait for the new AGESA from AMD. |
Posted By: emistrzu
Date Posted: 13 Dec 2018 at 5:36am
|
It's exacly F4-3200C14D-16GTZRX kit with 2 stick of ram (2x8Gb) I think it should be Samsung B-Die Taiphoon says: Manufacturer Samsung Part Number K4A8G085WB-BCPB Package Standard Monolithic 78-ball FBGA Die Density / Count 8 Gb B-die (20 nm) / 1 die Composition 1024Mb x8 (64Mb x8 x 16 banks) Clock Frequency 1067 MHz (0,938 ns) https://imgur.com/xzYqsR4 |
Posted By: kschendel
Date Posted: 13 Dec 2018 at 8:52am
|
Double check that xmp is enabled and 3200 is selected, those sticks should hit 3200 easily and maybe higher. Can you post the cpu-z memory tab screenshot? |
Posted By: gizmic
Date Posted: 13 Dec 2018 at 1:58pm
|
those are not tuned for AMD systems you'll need to use RDC settings its just a matter of changing a few values ------------- 
|
Posted By: emistrzu
Date Posted: 13 Dec 2018 at 7:20pm
|
CPU-Z https://imgur.com/we9mTPm |
Posted By: gizmic
Date Posted: 14 Dec 2018 at 12:38am
|
rams are running at 3200 -------------
|
Posted By: emistrzu
Date Posted: 14 Dec 2018 at 7:11am
| now it dose, thanks for helping me out with that. |