X99M KILLER 3.1 DEBUG CODE 67
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1043
Printed Date: 23 Dec 2024 at 6:21am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: X99M KILLER 3.1 DEBUG CODE 67
Posted By: stevejayd
Subject: X99M KILLER 3.1 DEBUG CODE 67
Date Posted: 17 Oct 2015 at 5:00am
|
i JUST TRIED TO BOOT UP MY NEW X99M. I HAVE MEMORY INSTALLED , GRAPHICS CARD, I7-5820, NO DISK DRIVES YET. THE SYSTEM STOPS WITH A DEBUG CODE OF 67.. TRIED TO FIX BY CLEARING CMOS.. STILL THE SAME. ANY HELP? < id="kpm_plugin" ="application/x-KPMPlugin"> ------------- STEVE |
Replies:
Posted By: Xaltar
Date Posted: 17 Oct 2015 at 3:59pm
Welcome to the forums  Code 67 is a "chipset initialization error" according to your user manual. Now the manual recommends clearing CMOS but that is not the only possible cause. Before we get into any additional troubleshooting did you try using http://forum.asrock.com/forum_posts.asp?TID=630&title=how-to-clear-cmos-via-battery-removal" rel="nofollow - this method to clear CMOS? This way is more or less foolproof and should reset everything including the RTC (real time clock). If that still does not resolve the issue then check to make sure your CPU is properly seated and there are no bent pins on the motherboard also reseat your RAM and GPU. If none of this helps then you can try a minimal boot scenario, 1 stick of RAM, onboard iGPU, CPU and no other devices connected. Good luck and let us know if this helps.
|