Intel Motherboards - Z390 Taichi Ultimate 00 30 4C

Print Page | Close Window

Z390 Taichi Ultimate 00 30 4C

Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10527
Printed Date: 27 Dec 2024 at 7:17am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Z390 Taichi Ultimate 00 30 4C

Posted By: prbrucre
Subject: Z390 Taichi Ultimate 00 30 4C
Date Posted: 27 Dec 2018 at 11:39am

I built a new system with the Z390 Taichi Ultimate and on boot up I received the code 00 30 4C and nothing displayed on the monitor? Ideas?

Thanks, Rob.

-------------
Rob Bruce

Replies:

Posted By: ASRock_TSD
Date Posted: 28 Dec 2018 at 9:58am

Dear Prbrucre,

Thank you for choosing ASRock.

Regarding your case, we provide some suggestions to try:
1.     Clear CMOS to load BIOS default.
Please remove the power cord, and follow the user manual p21 to clear CMOS.
http://asrock.pc.cdn.bitgravity.com/Manual/Z390%20Taichi%20Ultimate.pdf
2.     Only install CPU and one stick memory to check if the system can boot into BIOS properly.
3.     Please try to install one stick memory at A1, B1, A2 and B2 slot to check if the system can boot into BIOS properly.
4.     Reinstall CPU and check if CPU socket pin is fine.
5.     If it is possible, please change another CPU or DRAM to check if the system can boot into BIOS properly.

Thank you!
Yours truly,
ASRock TSD

Posted By: prbrucre
Date Posted: 30 Dec 2018 at 8:11am

Thanks. I was able to system to boot to the bios.

-Rob.

-------------
Rob Bruce