Print Page | Close Window

PC won't post as rock b350m

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10585
Printed Date: 27 Dec 2024 at 3:58am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com


Topic: PC won't post as rock b350m
Posted By: rudez
Subject: PC won't post as rock b350m
Date Posted: 02 Jan 2019 at 8:39am

Hey all!

Im having a slight issue with my PC - it won't post. This is not a new PC that I have recently built - I built this over a year ago and it has been running fine for the majority of its life, bar a couple issues.

Over the last couple months the PC has sometimes not been able to post. Fans start spinning, the led indicator on the GPU is illuminated - everything looks normal, except my keyboard/mouse doesn't light up, and nothing displays on my monitor.

To rectify this I have reseated my RAM (which were in slots A2, B2), and it would start up. Later down the track, when encountering the same problem, I have had to try starting up without RAM installed (to no avail,) then turn off PC, install RAM in slots A2 B2, and start up again. This has mostly worked for me. However, about a week ago when having the no post issue, I used the same troubleshooting steps without success. I tried booting with the RAM in slots A1 and B1, and my computer posted.

Today my no post issue has resurfaced. When I first turned the PC on the fans and lights came on as normal, but nothing would post - the PC just stayed on. I tried booting without ram, which sent the pc into a boot cycle. I shut it down, reseated the ram, and turned it back on, and the pc went into the same boot cycle it did when there was no RAM installed. I then tried booting with a single ram stick in A1 or A2 without success. Now no matter where I have the RAM installed, the PC goes into a boot cycle. Having exhausted the steps I would usually take to rectify this situation I looked online for other ideas.

I found the "How to respond to a no POST or no power up situation" thread and followed the steps that I could - I have checked to ensure all cables are securely connected, I have reseated the GPU, I have cleared the CMOS. Unfortunately I don't have another PC to test my RAM, or GPU on, nor do I have a debug speaker attached to my Mobo.

I am entirely stumped and am unsure how to proceed. I am thinking of going to the PC store today to buy new RAM or a new MOBO, but I was hoping to get some advice as to where the problem most likely lies. I don't want to buy new RAM to realise it was the MOBO or vice versa.


The following are the components in the PC:

Ryzen 5 1600x
16GB DDR4 Corsair CMK16GX4M2B3000C15 (2x8G) 3000MHz Vengeance LPX BLACK RAM
ASUS GTX1060 6GB DUAL OC
Asrock b350m pro4 mobo
coolmaster hyper 212 evo cpu cooler
512GB Intel 600p Series M.2
Corsair TX550M
1TB WD 3.5" 7200rpm
fractal design define mini c

Thanks in advance guys, looking forward your replies :)

-Rudez



Replies:
Posted By: garych
Date Posted: 02 Jan 2019 at 7:07pm
It might also be a PSU problem. Have you considered testing with another one?



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.04 - http://www.webwizforums.com
Copyright ©2001-2021 Web Wiz Ltd. - https://www.webwiz.net