Hi,I need to activate the wake on LAN on N3700-ITX Motherboard. In the section of the ACPI BIOS Configuration I have enabled the PCIE Devices Power On as stated in the manual, but if I send a message of wakeup (via router Asus RT-AC87U), the card will not turn on. Do you have any suggestions ?
Update....
I use Debian: Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u5 x86_64 GNU/Linux
after i do the command: ethtool -s eth1 wol g
I see parameter below:
Settings for eth1: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full Supported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised pause frame use: Symmetric Receive-only Advertised auto-negotiation: Yes Link partner advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Link partner advertised pause frame use: Symmetric Receive-only Link partner advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: MII PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: pumbg Wake-on: g Current message level: 0x00000033 (51) drv probe ifdown ifup Link detected: yes
NOW WAKE ON LAN IS WORKING.
|