AMD Motherboards - Win10 won't recognise RAID array

Print Page | Close Window

Win10 won't recognise RAID array

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10808
Printed Date: 10 Feb 2025 at 2:08am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Win10 won't recognise RAID array

Posted By: Mee1000
Subject: Win10 won't recognise RAID array
Date Posted: 31 Jan 2019 at 4:43am

Hi all. Hope I've posted in the right place this time.

I've a Taichi X399, 3.50 BIOS. I've finally set up an NVMe RAID 0 array.

When I start to install Win10 from a recently produced USB drive, before installing the drivers, the individual drives in the array are detected, fine.

The three RAID drivers install, one after the other, exactly as in the manual.

After the last driver installs, no RAID or other drives appear, nothing.

I have the latest RAID drivers. I have tried resetting the BIOS and following the instructions in the manual scores of times.

Just once, the RAID aray appeared. Don't know what I did differently, but excited, I selected it and tried to move on with the Win10 install. "No suitable drives detected" (or something like that).

I've tried disabling CSM. Nothing. Might it be something to do with IOMMU, even though I'm using a recently downloaded Win10 image?

Cheers