Fatal1ty B450 Gaming K4 BIG problem sink
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10845
Printed Date: 26 Jul 2025 at 8:25pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Fatal1ty B450 Gaming K4 BIG problem sink
Posted By: mattew1
Subject: Fatal1ty B450 Gaming K4 BIG problem sink
Date Posted: 06 Feb 2019 at 4:00am
sorry for my bad english. I bought an arctic 33 plus but I have a problem.
I bought a 2600x and the arctic and this mobo last week and today i have assembled the pc. but I have a problem does not adhere.I put it
in practice I dance these (I circled them in red)
https://ibb.co/gPdYJ41. moving ones like suspensions obviously does not make contact if I put the case upright
https://ibb.co/JdcHRfd
Here we can see that there is a peg underneath, while it does not come out afterwards
Here we see. Disassembled dissipator. The peg below is there while no
https://vimeo.com/315503646 watch the video so you understand
Is it normal for the backplate to move and make so much play? or has it broken (unglued from the motherboard)?
|
Replies:
Posted By: xhue
Date Posted: 06 Feb 2019 at 6:29am
It is definitely NOT supposed to wobble like that!
I think you used the wrong screws for the mounting. Mounting screws (come with the kit) are 24mm. AMD ones are 20mm! Although threading is different on the different screws, one can tighten them in the wrong place with some force.
Here is the installation manual for AM4: https://support.arctic.ac/index.php?p=freezer33plus
Here is a good video: https://www.youtube.com/watch?v=B9TqCqfLVUs
|
|