Issue With EVGA RTX 2070 & EP2C612-WS
Printed From: ASRock.com
Category: Media & User's Review
Forum Name: Intel Motherboards
Forum Description: ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10908
Printed Date: 18 Jul 2025 at 12:45pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Issue With EVGA RTX 2070 & EP2C612-WS
Posted By: stickfigure
Subject: Issue With EVGA RTX 2070 & EP2C612-WS
Date Posted: 17 Feb 2019 at 2:38am
Hi.
First post on this forum.
My System:
EP2C612 WS
QX2710 LED monitor
2 x E5-2630 v4
128 GB RAM
1200W PSU
Win 10 PRO
Currently I am using an EVGA GTX 1080 ti graphics card that has worked perfectly since I installed it in 2017.
I have been trying to upgrade to an EVGA RTX 2070.
Here's the problem:
When I install the 2070 the system boots, you can hear the Win 10 boot chime, but all you see is a full screen that starts white then goes to black then to red then green and then blue and repeats.
The 2070 connects to the monitor via an included HDMI-DVID adapter cable.
I have the 1080 installed in PCIE slot 7, set in BIOS to Gen 3, X16 and all works well. But I get the above result when I install the 2070 in the same slot.
An Important Note:
I have a system set up using the EP2C602 MOBO that normally uses an EVGA 980 ti. When I replace the 980 with the 2070 it boots right up with no problems.
Any thoughts from anybody?
|
Replies:
Posted By: stickfigure
Date Posted: 19 Feb 2019 at 2:10am
AN UPDATE: Problem Resolved
It turns out the problem was the monitor.
A QNIX QX2710LED, first generation.
It simply didn't like the output from the 2070.
I tested the card in 3 other machines and all was well.
When I changed out the monitor on my EP2C612-WS all was well.
Ordered a new monitor last night.
Thanks for your time.
|
|