First built pc, boots but no signal to monitor
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10953
Printed Date: 27 Jul 2025 at 6:54am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: First built pc, boots but no signal to monitor
Posted By: luka0987
Subject: First built pc, boots but no signal to monitor
Date Posted: 24 Feb 2019 at 1:01am
|
First built pc, boots but no signal to monitor Specs: ASRock b450m hdv Ryzen 5 2400g AMD rx 580 EVGA 500 80 Bronze 8 GB DDR4 Gskill 3200mhz I have built a new pc and connected all of the cables correctly,checked a few times if something isn't connected well but everthing was fine. All fans are spinning when the pc is turned ,I also restarted the CMOS with the jumper on the mobo , I tried to connect to the monitor with hdmi on the gpu, I tried another monitor with vga to mainboard, I have tried using both ram slots , I tried changing display otput on monitor who you need to set up manually, there were no beeps, I also used an antistatic wristband while I was building the pc. What should i do? I spent hours and hours viewing forum and tutorials what could be wrong but I tried everthing and nothing worked. I have also tried taking out the cpu and motherboard alltogether an connecting everything again, I have tried running on only the psu, apu and motherboard and later added the ram but still no luck. Please help me if you have some useful information or ideas. |
Replies:
Posted By: luka0987
Date Posted: 24 Feb 2019 at 3:29am
|
SOLVED!! I've fix the problem, I just took the speaker for the motherboard from my old pc and put it in the new one and it worked, but the old one didn't |
Posted By: xhue
Date Posted: 25 Feb 2019 at 1:27am
Yes, they sometimes tend to do that. 
|