ASrock b450m pro4 bootloop help
Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=10996
Printed Date: 26 Dec 2024 at 6:48pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: ASrock b450m pro4 bootloop help
Posted By: VedoSan
Subject: ASrock b450m pro4 bootloop help
Date Posted: 02 Mar 2019 at 2:48am
|
Hi guys, I recently got all components I ordered for building my first PC. When I connected everything and pressed the power button, PC turns on and stays that way for about 30 seconds and then reboots. And continues along the same pattern. Here are the specs: Processor: Ryzen 5 1600x Cooler: Hyper 212 turbo LED Motherboard: ASROCK b450m pro4 PSU: Corsair VS 550 RAM: Crucial CT8G4DFS824A.C8FE (8GB DDR4 2400Mhz UDIMM) GPU: GTX 1060 3gb gigabyte windforce oc I know that this RAM is not compatible, but I tried turning it on without the RAM and I got the same issue. Also when I connected the GPU, fans start spinning couple of seconds after initial boot, then stop spinning, and I did not get any display output to the monitor. So I decided to remove the GPU until I fix the booting problem. So my question is, if I get compatible RAM sticks, will this solve my problem? Or could the problem be more serious? Thanks |
Replies:
Posted By: xhue
Date Posted: 02 Mar 2019 at 2:55am
|
First, your Ryzen does not have an integrated GPU. You need a dedicated one. Second, leave just 1 stick of RAM and clear CMOS. Try booting now. |
Posted By: VedoSan
Date Posted: 02 Mar 2019 at 2:57am
|
I understand the first point, although I don't need the visuals in order to fix the boot problem For clearing the CMOS, I am not exactly sure how to do that, do you have any tips? |
Posted By: VedoSan
Date Posted: 02 Mar 2019 at 3:44am
|
I checked the manual and it mentioned to put a jumper over the CMOS pins, but the jumper didn't come with the motherboard. Anyone know how to reset it without the jumper? |
Posted By: VedoSan
Date Posted: 02 Mar 2019 at 4:24am
| Update: I reset the CMOS by pulling out the battery. I still get the same issue |
Posted By: xhue
Date Posted: 02 Mar 2019 at 4:27am
|
To clear CMOS: - unplug the power cord from the wall - plan A - use a screwdriver (or a coin, or paperclip, etc.) and short the 2 pins as described in the manual; keep it for 10 sec. - plan B - with the power cord still unplugged, remove the button (coin) battery; press the power ON button on the PC; hold the power button for 10 sec; release and put back the battery; Your CMOS is now cleared. |
Posted By: VedoSan
Date Posted: 02 Mar 2019 at 4:41am
|
Thanks, I tried what you suggested with and without the RAM inserted. I still get the same bootloop issue. I will be buying a better RAM soon, I suppose that might be an issue? |
Posted By: xhue
Date Posted: 02 Mar 2019 at 5:23am
| Well RAM is the most likely reason. However, you may want to try and re-seat the CPU and check all cables once more, while waiting on the new RAM. |
Posted By: VedoSan
Date Posted: 02 Mar 2019 at 6:19am
| Yeah, I will try that, also will try with another PSU |
Posted By: VedoSan
Date Posted: 03 Mar 2019 at 6:57pm
|
Thanks guys, it was the RAM after all. I put 2x hyperx fury 2400Mhz 4GB (HX424C15FB/4) and it booted normally |
Posted By: Ruslikan69
Date Posted: 10 Jan 2020 at 5:03am
Hello, I found ram compability tables for all cpu ages in box, and it can help u with boot loop, u need to try different ram configuration, first try to put 1 ram stick in 2 slot,if it not help, try others, and look for sheet in box. sorry for bad English, only want to help.
|