Z97 Extreme6 shuts off immediately, Dr. Diag 00
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1100
Printed Date: 23 Dec 2024 at 11:57am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z97 Extreme6 shuts off immediately, Dr. Diag 00
Posted By: wateronsand
Subject: Z97 Extreme6 shuts off immediately, Dr. Diag 00
Date Posted: 26 Oct 2015 at 4:27am
|
Hi All, To eliminate variables, the board is not mounted in a case, only connected to the PSU, and only the CPU with stock cooler are installed. When I press the power button on the board, fans spin and Dr. Diag lights up 00. In less than a second, the board shuts back down. I've tried reseating the CPU and resetting CMOS. Is the board (or CPU) DOA? Anything else I can try? PSU: EVGA Supernova 750 G2 CPU: i5-4690k Thanks! |
Replies:
Posted By: ASRock Expert
Date Posted: 26 Oct 2015 at 5:41am
|
What UEFI version sticker is on the EEPROM? It needst to be 1.30 or newer for the 4690k. http://www.asrock.com/mb/Intel/Z97%20Extreme6/?cat=CPU ------------- 990FX Extreme 9 MOD P1.70 AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
Posted By: wateronsand
Date Posted: 26 Oct 2015 at 7:36am
|
Version is p2.30. |
Posted By: wateronsand
Date Posted: 26 Oct 2015 at 2:31pm
|
Mistake on my part, I neglected to connect the 8 pin CPU power
connector. I misread the PSU docs as saying this connection was
optional (it actually says that a *secondary* 8 pin connector, if
present, is optional) - forgive me, it's been the better part of 10
years since I did a build. Connecting the 8 pin solved the problem. Thank you! |
Posted By: Xaltar
Date Posted: 26 Oct 2015 at 2:36pm
Glad to hear you found the problem, enjoy your new build 
|