WoL ASRock B760M PG Lightning/D4
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=110585
Printed Date: 30 Aug 2025 at 4:55am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: WoL ASRock B760M PG Lightning/D4
Posted By: ZAIAC001
Subject: WoL ASRock B760M PG Lightning/D4
Date Posted: 01 Jun 2025 at 7:18pm
|
Hello Can someone help me to enable WoL on ASRock B760M PG Lightning/D4 Setup: OS: Win11 Pro MB: ASRock B760M PG Lightning/D4 CPU: i5 12400f GC: Nvidia GT710 16GB RAM 2 NVMEs WoL just not work I enable it in driver in OS In BIOS tab "advanced" section "ACPI" "PCIE devices power on" is grayed out and in enabled mode What should I do? PS: I know that WoL work only while power not interrupted I perform gracefull shutdown and try to send WoL (which not work) |
Replies:
Posted By: Gilvonet
Date Posted: 10 Jun 2025 at 4:21am
|
According to the board's specifications, it supports wake on line, I wonder why it shows grayed out in UEFI... Make sure you have enabled it under the cards properties in device manager and that Power Management tab shows Allow this device to wake the computer, also in the advanced settings tab, the wake on magic packet is enabled. For wake on Lan to work, the network card always needs to be enabled/powered on, so turn off the power supply or disconnect from the AC. Unfortunately, the network card in that board is realtek (Dragon RTL8125BG), so you might want to try any drivers from there. If you have access to a PCIE express you can try to enable WOL and see if the built-in is defective. Best of luck. |
Posted By: Gilvonet
Date Posted: 10 Jun 2025 at 4:23am
|
I meant to say do NOT turn off the PSU or disconnect from AC!!! I am sorry, english is not my first or second language. Thank you, Good luck! |
Posted By: Richard542
Date Posted: 10 Jun 2025 at 3:17pm
You should check and update the latest BIOS for your motherboard, also make sure Wake on PCI-E is enabled in the BIOS (if possible), check the power settings in Windows and the network card to make sure WoL is fully enabled. |
ZAIAC001 wrote: