AMD Motherboards - Windows 11 not recognizing drivers during setup

Print Page | Close Window

Windows 11 not recognizing drivers during setup

Printed From: ASRock.com
Category: Technical Support
Forum Name: AMD Motherboards
Forum Description: Question about ASRock AMD motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=110625
Printed Date: 01 Sep 2025 at 4:51pm
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com

Topic: Windows 11 not recognizing drivers during setup

Posted By: ErikSchulp
Subject: Windows 11 not recognizing drivers during setup
Date Posted: 03 Jun 2025 at 8:52pm

Hi all,
I am clean installing a W11 Pro PC, formerly ran W11 already, than ran Linux for a while and it's going back to W11 now.

However, when booting from USB al runs fine, until Windows setup asks for a driver so it can see my storage.

I have the drivers downloaded from the ASRock support site (SATA floppy 9.3.0.296) on a usb stick, setup sees the stick, also sees the folders but keeps telling me no drivers were found. Or when I point it to a subfolder ' error scanning for drivers'.

Have tried several times now but same result. Starting a command prompt and using diskpart I can see / access the disks.

Motherboard is a B550 Extreme4 with BIOS 3.4.

Am kind of at a loss what's going wrong here, unless of course it's a case of the wrong drivers.

Any ideas/suggestions?

Best regards,
Erik