Z170 Pro4S Bios Versions and USB Hardware Fail
Printed From: ASRock.com
Category: Technical Support
Forum Name: Intel Motherboards
Forum Description: Question about ASRock Intel Motherboards
URL: https://forum.asrock.com/forum_posts.asp?TID=1117
Printed Date: 23 Dec 2024 at 11:20am
Software Version: Web Wiz Forums 12.04 - http://www.webwizforums.com
Topic: Z170 Pro4S Bios Versions and USB Hardware Fail
Posted By: cctfer
Subject: Z170 Pro4S Bios Versions and USB Hardware Fail
Date Posted: 28 Oct 2015 at 8:42pm
|
Hey Community, since my Z170 Pro4S is new and I am experiencing problems, I check weekly for bios upgrades and recently installed 2.30. Now I found out that the 2.30 version has been removed from the download section, instead, only 2.10 and 1.90 are displayed. My problem with 1.90 and 2.30 was/is that my USB hardware fails to start occasionally (ca. 1/20 attemps to start). This applies to keyboard and mouse (so I can exclude any brand related failures), even in the bios itself (so I can exclude a Windows failure). Plugging it out and in again helps but this can't be an adequate solution. Furthermore, sometimes my PC won't start at all (ca. 1/40 attemps to start). Only a CMOS reset via removing the battery for a cupple of minutes helps. Again, this is very frustrating. I am unable to reproduce these failures by purpose, they just seem to happen when they like to. 3 Questions: - Is it possible that this is fixed in bios version 2.10 and would it be possible to downgrade from 2.30? - Is there anything else I can do to fix these failures? - What's the reason the 2.30 got removed, should I be worried that I got it installed? Thanks a lot! cctfer
|
Replies:
Posted By: ASRock Expert
Date Posted: 28 Oct 2015 at 9:22pm
|
1. Yes, downgrade is possible - via Instant Flash (on an USB stick, Formated FAT32, F6 during POST) 2. It could be an OS issue too 3. Only ASRock TSD knows that ------------- 990FX Extreme 9 MOD P1.70 AMD FX 8120 4GHz 1.25V Thermalright HR-02 Patriot Viper 2x4GB 2133MHz Samsung 850 EVO 250GB MSI R7970 TFIII 3GB CORSAIR VX550W LanCool K62 Dragonlord ASUS Xonar D2X |
Posted By: parsec
Date Posted: 29 Oct 2015 at 4:03pm
|
If a UEFI/BIOS version was removed from the download list, that means it had at least one issue that was significant enough to cause its removal. Given the huge number of possible problems a UEFI/BIOS could have, instead of worrying about it just flash to an earlier version. Software is surprisingly difficult to create and maintain. I know Intel has removed at least one version of its IRST software every year from their download page, after it was officially released. They did that recently with a version that was released to mother board manufactures, and included on the download pages of many mother boards. ------------- http://valid.x86.fr/48rujh" rel="nofollow"> 
|
Posted By: cctfer
Date Posted: 30 Oct 2015 at 8:39pm
|
Thanks for your answers! When I wanted to download 2.10 it turned out that 2.40 got released today so I'll give it a try. Just curious though, how can this be an os issue if these failures occur in bios too?
|
Posted By: parsec
Date Posted: 31 Oct 2015 at 1:17am
|
Well, I never said that your USB problem is related to the OS. By the way, what OS are you using? We have no idea. When you said you have USB hardware failures, I assume that means your mouse and/or keyboard don't work when in the UEFI/BIOS? Are you using the Fast Boot option? Your board has only USB 3.0 ports on the IO panel. Do you have the mouse and keyboard connected to the USB 3.0 ports? I've noticed on several of my ASRock boards, that right after a UEFI/BIOS clear, my wireless mouse and keyboard won't work in the UEFI. That is normal in my experience, and they work fine after the PC boots into the OS after the UEFI clear. Why that happens I don't completely understand, but IMO is not an issue with the board. ------------- http://valid.x86.fr/48rujh" rel="nofollow">
|
Posted By: cctfer
Date Posted: 01 Nov 2015 at 9:23pm
|
Sorry, it's Windows 10 Education. Yes, when the keyboard isn't working I can't get to the UEFI of cause but that happens very rarely, ca. 1/100 attempts. Well, I just noticed this one time and I'm not even sure if I wasn't too late to get to the UEFI so this might actually be an OS issue when the keyboard fails. All I can say for sure is that my mouse sometimes isn't working and this also applies to the UEFI, so I thought this might be a motherboard issue. I didn't clear the UEFI. I'm not using the Fast Boot option, but made some other changes in the UEFI: Onboard LAN Disabled Onboard HD Audio Disabled Good Night LED Enabled All fans on silent mode Yes, all hardware is connect to the USB 3.0 back ports via cable. I'm not using any front ports. Thank you for your help, but maybe I have to investigate this a bit further. I'm still not sure when and why this is happening so I know it's hard to help. I just thought that maybe this is known or maybe there are others who had the same problem.
|